[vc_row][vc_column][vc_column_text]FPV DIY, Repairs and Mods are a collection of extraordinarily helpful FPV drone relevant articles. FPV DIY, Repairs and Mods serves to teach a range of useful hacks that will keep your FPV racing and freestyle drone in the air for longer, and for as cheaply as possible. Articles in the FPV DIY, Repairs and Mods category are essential knowledge for any FPV drone pilot, no matter their skill level.[/vc_column_text][/vc_column][/vc_row]
Congratulations! You’ve worked out your first design and you’re ready to get it manufactured. Maybe you’ve followed our design tutorial, a youtube guide, or just felt your way through it. Whatever it is, congratulations on making a design, and working through the process of getting it cut. Here are some tips, links, and general knowledge…
DetailsA printable whoop frame that combines the strengths of two interesting materials: polypropylene and bamboo toothpicks. The design looks crazy but it can easily be produced on an entry level 3D printer at low cost and assembled with basic skills and tools.
DetailsI recently began a journey of testing in Betaflight 4.2 to achieve the least amount of propwash possible on my 5-inch freestyle drone. This resulted in a few interesting findings especially the outstanding amount that software can impact your flight performance. I have developed the best settings possible to make your quad fly the best it can.
DetailsNo longer do you have to settle with mediocre, low framerate footage, dreaming of the day when you can afford such luxury as an ImmersionRC Powerplay. With just a few clicks in software, your DVR can look just like the pros! In this article, we’ll be going over a method which can increase your framerate from 30 to 60 frames per second.
DetailsThis article was submitted through the GetFPV Community Program by Aidan. Disclaimer: This article was written solely by a member of the FPV Community. Views and advice in this article are that of the author and does not necessarily reflect the opinion or views of GetFPV. You can follow Aidan on Instagram or YouTube. Just got a…
DetailsEver get that one annoying little speck of dust in your FPV goggles? It always seems to get stuck between the screen and lens, leaving a dot, streak, or mark in your vision that can be rather distracting. In this article, we’ll go over how to remove dust from your Fatshark HDO2 goggles in a safe, reliable manner.
DetailsIn this article, we’ll be completely gutting out my old pair of Aomway Commanders to fit a standard receiver module, much like one found in a pair of Fat Sharks or FPV receiver-compatible goggle.
DetailsDo you have a whoop that keeps throwing props? Here’s how to fix it.
DetailsIn this tutorial, we will modify an old computer power supply so that you can use it for a LiPo charger such as an ISDT. This project does not cost as much as pre-built power supply, and the materials for this are easy to find. By making this power supply, there is no need to…
DetailsIn this tutorial, we will be making a parallel charger for your LiPo batteries. Parallel charging is a fast and efficient way of charging multiple batteries at once. This way, you can get back in the air faster to fly! By making a charger, you will understand the concept behind it, and will be able…
Details
