Introducing Darwin FPV's "Cement" ESC: the ultimate solution for professional pilots, addressing the reliability issues of FPV drones. With its ultra-durable waterproof design, you fly confidently in any environment, enhancing your flying experience and inspiring creativity. Packed with advanced features like streamlined interfaces, improved thermal management, and robust hardware protections, ensuring stability and reliability in extreme conditions while maintaining compatibility and a flying feel.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: Diatone Mamba H743 MK4 FC & 128K ESC Unboxing

• Onboard multi-level LED indicator lights for quick inspection of flight controller operation status
• F435 main control chips boast incredibly strong computing power
• Unparalleled experience and top-tier enjoyment
• IP67 dust and waterproof rating
• 128KHz dynamic PWM output
• Increased spatial utilization
• Enhanced heat dissipation
• Greater current capacity
• Multiple protections

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

• MCU: 32-bit F4 with a main frequency of 120MHz, supporting a maximum PWM Packet Rate of 128KHz
• Continuous/Peak Current: 100A x 4/120A x 4 (continuous 100A requires a water-cooling environment)
• Supported Throttle Signals: Dshot150/300/600/1200, MultiShot, Oneshot42, Oneshot125
• Weight: 23.0g ± 0.2g (excluding capacitors and power cords)
• Current Sensor: Supported (current meter scale: 125)
• Application: Suitable for 5-10 inch FPV Drones
• Dimensions: 36.8mm x 42.5mm x 7.5mm
• Mounting Hole: 30.5mm x 30.5mm
• Power Cord: 14AWG, 120mm long
• Firmware Name: DARWIN_F4_60
• Input Voltage: 3-8S LiPo
• Power Plug: XT60

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x 14AWMG power cable with a length of 120mm (soldered to the ESC)
• 4x M3*6.6MM shock-absorbing balls (installed on the ESC)
• 1x 35V/1000uF electrolytic capacitor (soldered to the ESC)
• 1x DarwinFPV Cement 100A 32bit ESC
• 1x 30mm ESC cable (8P)
• 1x Sticker
• 1x XT60

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS