The BETAFPV F722 2-6S AIO 35A Flight Controller is a very reliable FC that is made to meet your advanced FPV needs. This FC comes with an F722 chip, BLHELI_S ESC firmware, and a board that provides a better performance capability and higher calculation speed, bringing pilots a more stable and smoother flight. What's more? F722 AIO 35A FC has an added 6-pin connector for DJI Digital VTX, so all you need to do is just plug & play resulting in less soldering and easy installation. It also can handle up to 6S of input voltage and push your FPV racer to the max! BETAFPV highly recommends it for any 4-5'' toothpick quad, such as X-Knight 5'' Toothpick Quad.

Features

• Compared with F4 AIO 35A FC, F722 FC's firmware is upgraded from F411 to F722, providing a better performance capability and higher calculation speed, which brings pilots a more stable and smoother flight.
• F722 AIO 35A FC has specially added a 6-pin connector for DJI Digital VTX, just plug & play, less solder work needed, perfect for the pilots who enjoy the DJI Digital VTX system.
• 6 full UARTs are available on this board. With plenty of UARTS, Pilots could have more options for external parts like VTX, GPS, Receiver, and other components.
• It can handle 35A continuous current(40A burst), totally supports the 2-6S lipo battery, brings the drone a stronger flight performance.
• With the 6S battery and this F722 35A AIO toothpick FC, the drone will break through the limit of the power of the toothpick drone, exploring more possibilities in 4-5'' drones.

Specifications

Flight Controller

• OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)
• Firmware version: betaflight_4.2.x_BETAFPVF722
• Support programmable LED like WS2812 etc
• Six-Axis: MPU6000 (SPI connection)
• Mounting hole size: 26mm * 26mm
• Item: F722 35A AIO FC(BLHeli_S)
• CPU: STM32F722RET6
• Built-in current sensor
• Weight: 7.89g

ESC

• Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/Flysky Receiver/DSMX Receiver/TBS Crossfire Receiver (requires external connection)
• Signal support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
• Recommended motors: 14XX series, 15XX series, 16XX series, 18XX series, 20XX series
• Indicators: 2 indicators: receiver indicator (green)/Flight control power indicator (red)
• Connecter: 80mm 14AWG silicone cable with XT60
• Capacitance: CS|5*10*13mm|470μF|35V
• ESC firmware: BLHELI_S
• Input voltage: 2S-6S Lipo
• Continuous current: 35A
• Peak current: 40A

Recommended Parts ( Not Included)

• Frame: 4-5 inch Frame, highly recommend for TWIG ET5 5'' Toothpick Frame, X-Knight Carbon Fiber 5'' V2 Frame Kit and X-knight 5'' frame
• Motor: 1805 1550KV brushless motor, 2004 Brushless Motors, 1606 Brushless Motor, 1506 Brushless Motor
• Compatible Propellers: Gemfan 5125 3-Blade props and Gemfan 5020 props
• Battery: 550mAh 6S 75C battery, 450mAh 4S battery, 4S 1000mAh Battery
• BNF: highly recommend for TWIG ET5 and X-Knight 5'' Toothpick Quad
• VTX: M02 25-350mW 5.8G VTX, A02 25-800mW 5.8G VTX

Includes

• 1 x Toothpick F722 35A AIO 2-6S Brushless Flight Controller
• 1 x 6-Pin Connector for DJI Digital VTX
• 1 x Cable Pigtail (XT60U)
• 4 x M2x10mm Screws
• 1 x Capacitance
• 8 x M2 Nuts