This replacement top plate is for the Ummagawd 2Fiddy Ultra Light Freestyle Frame. The 2Fiddy was designed to be simple yet durable. With durable carbon fiber plates, universal FC/ESC mounting options, and room for HD or Analog FPV gear... this frame is perfect for all of your lightweight flying needs.

Note: This is a replacement top plate only. Frame, electronics, props, motors, and camera are not included.

VIDEO: 2Fiddy Build | Step by Step

Features

• 1.5mm Thick Carbon Fiber
• Ultra Lightweight
• Durable

Ultra Lightweight

There’s no doubt that a 250g 5” Freestyle Drone is a new category, with very different design goals and limitations. We wanted to extract as much power, response, durability, and of course “fun”, while getting as CLOSE to an AUW of 250g as we can.

Why? Because let's face it, having some weight to toss around allows for a bit more "expression" with your freestyle and there's something just absolutely satisfying about it.

So, we tested and simulated a variety of carbon thicknesses, component layouts, and fasteners. We knew that simply scaling down a 5" frame may introduce frame resonance, and that will certainly affect performance. Although some resonance and vibrations can be smoothed out by firmware features, I believe that great frames shouldn't require special filtering to run smoothly.

Versatile

One of the most unique features of this frame is its versatility for mounting your FC/ESC. We recommend the use of AIO flight controllers to save weight but didn’t want to limit people to one layout. The 2Fiddy has holes for 30.5x30.5, 20x20, and whoop style layouts. And although we recommend running an AIO board, you can even run a dual FC/ESC stack by simply flipping the arms under the bottom plate and using the included 20mm standoffs.

While the frame was designed specifically around the Caddx Vista FPV system, analog FPV gear will work just fine. The rear section has 20x20 mounting holes that line up with the vista unit, and the top plate has a little notch to keep your antenna centered along the rear standoff. This design allows you to simply use a zip tie to mount your antenna without the need for a 3d printed part. The front camera cage is spaced for a 20mm DJI camera, however, smaller 19mm micro analog cameras work just fine. There are double slotted mounting holes for the DJI camera as well as a dedicated center hole for cameras such as the Nebula Pro HD, which provides 0-35 degrees of tilt. The cam cage features an innovative plate-lock design that ensures maximum camera protection while ensuring that the cage won't pop out in a crash.

Specifications

• Carbon Thickness: 1.5mm
• Brand: Ummagawd
• Weight: 8g

Includes

• 4x Ummagawd 2Fiddy Replacement Top Plate
• Note: This is a replacement top plate only. Frame, electronics, props, motors, and camera are not included.