The Holybro M10 GPS uses multi-constellation GNSS powered by the u-blox M10 series, a concurrent GNSS receiver that can receive and track multiple GNSS systems. Owing to the multi-band RF front-end architecture, all four major GNSS constellations, GPS, Galileo, GLONASS, and BeiDou, can be received concurrently. It also has the IST8310 compass, tricolored LED indicator, buzzer, and a safety switch. There are three different connector options for various purposes. This module ships with a baud rate of 115200 5Hz. The high-gain 25 x 25 mm patch antenna provides excellent performance, and the omnidirectional antenna radiation pattern increases flexibility for device installation. It features active circuitry for the ceramic patch antenna with a rechargeable backup battery for warm starts.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

• The newest Ublox 10th Gen GNSS
• High-gain 25*25*4mm antenna
• Internal Buzzer, Safety switch
• Fast & Accurate Positioning
• Ultra Bright UI RGB LED 
• IST8310 Compass

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

• Model: Holybro M10 GPS
• GNSS Receiver: Ublox M10
• Number of Concurrent GNSS: Up to 4 GNSS
  
  • BeiDou
  • Galileo
  • GLONASS
  • GPS
  • QZSS
• Frequency Band:
  • GPS L1
  • Galileo E1
  • GLONASS L1
  • BeiDou B1
  • SBAS L1
  • QZSS L1
• Compass: IST8310
• Output Protocol:
  • UBX (U-blox)
  • NMEA
• Accuracy: 2.0m CEP
• Nav. Update Rate:
  • Up to 25 Hz (single GNSS)
  • Up to 10 Hz (4 concurrent GNSS)
• GNSS Augmentation System
  • EGNOS, GAGAN, MSAS and WAAS
  • QZSS: L1S
• Default Baud Rate: 115200
• Input Voltage: 4.7-5.2V
• Port Type: JST-GH-10P
• Antenna: 25 x 25 x 4 mm ceramic patch antenna
• Power consumption: Less than 200mA @ 5V
• Operating Temperature: -40~80C
• Dimension: 50 x14.4 mm
• Weight: 32g
• Cable Length: 26cm (42cm cable purchase separately)
• Other: Tri-color LED, Onboard Buzzer, Safety Switch, LNA MAX2659ELT+ RF Amplifier, Rechargeable Farah capacitance, Low noise 3.3V regulator

IMPORTANT NOTES

• M10 GPS Requires PX4 1.14, ArduPilot 4.3, INAV 5.0.0, Betaflight 4.3.0 or newer.

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

• 3D CAD File Downloads
• Holybro Documentation
• Dimensions

• 1x Holybro M10 Standard GPS w/ 10-Pin Cable
• 1x Fixed Carbon Fiber GPS mount

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS