Introducing the AcroBee75 HD O3 BNF - a compact powerhouse. This pioneer whoop features a G4 flight controller and built-in ELRS2.4 receiver, effortlessly compatible with Dshot600 and bi-directional Dshot. As the tiniest and lightest HD whoop with a complete DJI O3 unit available, boasting remarkable agility, and an impressive flight time of nearly 3.5 minutes. Expert tuning ensures seamless indoor filming in self-level and acro modes.

Note: (Insert any product options here in black text with options in bold.)

Example: "Choose from two KV's: 1800KV (4S) or 2500KV (6S)."

Note: To optimize performance and visuals, turn on DJI RockSteady via goggle settings. Note that this model is not suitable for outdoor or windy conditions.

VIDEO: NewBeeDrone Acrobee75 HD DJI O3 BNF

• DJI O3 Integration for an enhanced and reliable FPV experience.
• The AcroBee75 is designed with a compact form factor, making it suitable for indoor and outdoor flights, especially in tight spaces.
• Equipped with powerful brushless motors, providing a perfect balance of efficiency and performance for a thrilling flying experience.
• The 75mm wheelbase frame is optimized for agility and stability, allowing for sharp turns and quick maneuvers.
• Constructed with lightweight materials to ensure agility without compromising durability.
• Supports Betaflight firmware, allowing users to customize and fine-tune the drone's flight characteristics according to their preferences.
• Features a high-quality camera for capturing clear and crisp FPV footage, essential for racing and cinematic applications.
• Built to withstand crashes and impacts, ensuring longevity and reliability during intense flying sessions.
• Integrated SmartAudio support for convenient and efficient control of video transmitter settings.
• Designed for convenience, the Bind and Fly (BNF) configuration allows for quick setup, enabling users to get into the air with minimal effort.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

PRE-TUNED AND PRE-SETUP

This RTF is fully built and test-flown by build technicians at our Florida facility.

ACROBEE75 BNF

• Drone Size: 75mm
• Flight Controller: BeeBrain HD G4 Flight Controller ExpressLRS (ELRS) 2.4G
• Frame: Cockroach75 Brushless Frame
• Motors: Flow 0804 12000kv Double Ball Bearing Brushless Motor
• Propellers: Azi (Tri-Blade) Micro Propellers 40mm - 1.0mm Shaft
• HD VTX & Camera: DJI O3 Air Unit
• Canopy: NewBeeDrone Acrobee75 HD O3 Canopy
• Total Weight without battery: 70.19g

BEEBRAIN HD G4 BLV5 FLIGHT CONTROLLER

• MCU: STM32G474
• ESC Firmware: Z-H-40 - Bluejay 0.19.2 48kHz.
• ESC Specifications: 1 channel 20A ESC
• Receiver: NBD ExpressLRS 3.0 Diversity (non-SPl)
• Receiver Antenna: 1x BeeT-Antenna 1x 2.4G receiver antenna
• Flight Controller Weight:7.4g (including antenna and XT30 Battery connector)
• Flight Controller Size: Outer dimensions:29 x 29 x 7.6 mm
• Flight Controller Holes: 25.5 x 25.5 mm
• Battery Input: 1-2S
• BEC:10V 2A for DJI O3 (under 2S power only)
• BEC：5V 2A
• UART1: Free
• UART2: TX & RX for EXPRESSLRS 3.0 receiver
• UART3: Free
• UART4: Free

IMPORTANT NOTES

• For outdoor flying, RockSteady is required to get the best picture quality(On DJI goggle Menu). The PID tunes are based on the current setup. If you change any setting on the drone and it is acting weird, please flash the newest firmware.
• The UART-based ELRS is enabled on UART2 by default, but DJI is available on UART4 in the ports tab.

• Tattu 450mAh 7.6V HV 95C 2S Lipo Battery - Long Size (XT-30)
• Tattu R-Line Version 1.0 550mAh 2S1P 95C LiPo Battery

• NewBeeDrone GitHub

• 1x NewBeeDrone AcroBee75 BLV5 G4 BNF HD w/ DJI O3 - ELRS/DJI PNP
• 1x Extra Battery Strap (for other sized batteries)
• 2x Extra HD Canopies
• 4x Azi 40mm Propellers

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS