iFlight ProTek35 3.5" 4S CineWhoop w/ DJI Digital HD FPV System - BNF
iFlight ProTek35 3.5" 4S CineWhoop w/ DJI Digital HD FPV System - BNF
$0.00
Select options for stock status
Only left for same day shipping. Order now!
iFlight ProTek35 3.5" 4S CineWhoop w/ DJI Digital HD FPV System - BNF
After the very popular 3-inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series release, iFlight continue to strive to increase performance by coming up with their master Protek series.
About this product
After the very popular 3-inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series release, iFlight continue to strive to increase performance by coming up with their master Protek series. The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops!
iFlight was able to increase the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun; as a result, the ProTek35 is equipped with 2203.5 motors. It also features the DJI Digital HD System, Beast F7 AIO Flight Controller, 45A 2-6S ESC, and the Nazgul 3535 propellers.
Note: Battery, GoPro, and GoPro mount NOT included
Features
- No Props or frame in view!
- High-performance True-AIO Board Beast Whoop F7 AIO 45A to save weight and space
- T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)
- Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)
- Low Resonance frame construction (Less Jello, more Cinematic footage)
- DJI FPV Air Unit 720p 120fps FPV feed (record in 1080p/60fps)
- Butter smooth 2203.5 3600KV (4S)
- Pre-tuned with smooth freestyle settings
Pre-Tuned & Pre- Setup
- Don't worry about tuning, iFlight did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
- To restore lost tunes or updates, please check out this linked article: "Firmware/Factory Dumps"
- Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
- Please check out this linked article on "How to disable Angle-Mode, activate Acro-Mode"
Specifications
- Board Beast Whoop F7 AIO 45A
- Motor: XING 2203.5 3600KV (4S)
- Wheelbase: 151mm
- Body Size: 118*94.5mmmm
- Bottom plate thickness: 3.5mm
- Top plate thickness: 2mm
- Top and bottom plate spacing: 20mm (aluminum standoff height)
- Propeller size: 3.5 inch
- FC pattern: 25.5*25.5mm / 20*20mmmm
- FPV cam spacing: 20mm
- Weight: 348.3g (without battery)
FC // Beast F7 AIO
- MCU: BGA-STM32F745
- Gyro: MPU6000
- UARTs: 5
- Blackbox: 8Mb Onboard Flash
- BEC output: 5V 2.5A
- Barometer: BMP280
- Connector: Micro-USB
- OSD: AT7456E
- FC Firmware:IFLIGHT_F745_AIO
- Mounting pattern: 25.5*25.5mm φ3mm
- Dimensions: 32.5*32.5mm
- Weight: 8.5g
ESC // 45A 2-6S
- Current Sensor: Yes
- Input: 2-6S LIPO
- Current scale: 200
- Constant: 45A / Burst: 50A
- BLHeli: BLHeli-S
- RPM-Filter ready: Yes (JazzMaverick or JESC firmware)
- Telemetry: no
- ESC Firmware: BlheliS G-H-30
- Mounting pattern: 25.5*25.5mm/Φ3mm
- Dimensions: 32.5*32.5mm
Recommended Parts (Not Included)
- Fullsend 4S 95C 1300mAh
- DJI HD FPV Goggles
- DJI Remote Controller (Mode 2)
Includes
- 1 x ProTek35 Frame
- 1 x DJI FPV Camera
- 1 x DJI FPV Air Unit Module
- 2 x DJI FPV Air Unit Antenna SMA
- 1 x TPU Bracket for DJI Air Unit Module
- 1 x TPU Antenna holder for DJI antenna
- 2 x TPU camera side plate soft mount
- 2 x Nazgul 3535 propeller (Set of 4 - Color May Vary)
- 1 x iFlight Lipo Strap 15*150mm (Color May Vary)
- 1 x iFlight Lipo Strap 15*250mm (Color May Vary)
- 1 x GoPro TPU bottom stand black (GoPro Protector not included)
iFlight Support
iFlight FAQ - https://iflightrc.freshdesk.com/support/home
More Information
SKU | 15112 |
---|---|
Manufacturer | iFlight |
NDAA Compliant | No |
Item Returns | This item can be returned |