The Kopis 2 is a high-performance ready-to-fly FPV racing drone from Holybro, Low-deck design means centralized mass and excellent handling. Stretched-X motor layout is the choice of top racers because the rear props are further from the "dirty air" coming from the front props. The result is smoother cornering and higher top speed.
The FPV antenna is in a unique location behind the quad, to protect against damage. Kakute F7 V1.5 flight controller and Atlatl HV V2 video transmitter give perfectly integrated control of all quadcopter systems. T-Motor F60 Pro-Ⅲ 1750kv motors give awesome power and speed, just like top racers. RunCam Robin camera is light and small, with great image quality.
Kopis gives all the performance, looks, and durability of a hand-built machine, without ever having to pick up a soldering iron!
5mm full 3k carbon fiber twill
Counter-sunk screws on base for great appearance and protection of battery against damage.
KakuteF7 V1.5 flight controller with soft-mounted gyro for mechanical filtering of vibration. This means you can disable more software filters for best flight handling.
Improved soft-mounting foam for KakuteF7 gives an optimal balance of stiffness and damping for even better gyro performance than before!
Betaflight OSD included. Monitor voltage and battery capacity in your FPV goggles. Change PIDs and Rates using your transmitter sticks.
Atlatl HV V2 video transmitter:
- 5.8 GHz
- Standard 40-channel set. However 5645 MHz and 5925 MHz 5945 MHz are illegal in many areas, so they are not supported. If you select one of these channels, it will simply fail to work.
- Output Power: 0.5 mW (pit mode), 25 mW, 200 mW, 500 mW, 800 mW
- MMCX antenna connector for easy, secure connection. Won’t break or come loose like the IPEX connector used on other vTX.
- Control the vTX channel and transmit power from the OSD using your transmitter sticks or from your Transmitter. No more picking up the quad to change vTX settings!
RunCam Robin FPV camera
Adjustable camera uptilt from 0 degrees to 90 degrees.
Serial receiver supported (SBUS, iBUS, Spektrum).
- MCU: STM32F745VGT6 32-bit processor
- IMU: MPU6000 (SPI)
- Barometer: BMP280
- TF card for Blackbox logging
- Tekko32F3 4-in-1 40A ESC
- Supports 6S battery
- Weight 325 grams without battery or props
- 1x KOPIS 2 FPV racing drone - PNP
- 1x 5.8GHz FPV antenna
- 4x T5143S Propeller
- 4x T5147 Propeller
- 1x battery strap(installed)
- Additional Information
SKU 9198 Manufacturer Holybro UPC (GTIN) 721248872692 Static Block No