Happymodel Larva-X HD Micro Toothpick/Whoop FPV Drone Kit
Happymodel Larva-X HD Micro Toothpick/Whoop FPV Drone Kit
$0.00
Select options for stock status
Only left for same day shipping. Order now!
Happymodel Larva-X HD Micro Toothpick/Whoop FPV Drone Kit
The Happymodell Larva-X HD Micro is a great racing FPV drone! A cool feature about the Larva-X HD is that you can easily transform it into a toothpick or whoop style.
About this product
The Happymodell Larva-X HD Micro is a great racing FPV drone! A cool feature about the Larva-X HD is that you can easily transform it into a toothpick or whoop style. The Larva-X HD features the Caddx Baby Turtle, four different receivers to choose from, EX1203 High-efficiency Brushless Motors, and tons of cool specs!
Receiver options: Frsky XM+, Frsky RXSR, DSMX, Crossfire
Features
- Toothpick HD and Whoop HD 2 in 1 combo (Default Comes in Toothpick HD style)
- Toothpick style compatible both 2.5inch or 3inch propellers
- New design EX1203 High-efficiency brushless motors
- Caddx baby Turtle provides 1080P 60FPS DVR video
- Camera Angle adjustable
- Full range receiver options
- Buzzer ready
- Smooth and powerful
- Compatible both for 2s-3s Lipo/LIHV
Specifications
- Brand Name: Happymodel
- Item Name: Larva-X HD Micro FPV brushless Drone
- Wheelbase: 125mm
- Size: 105mm*105mm*35mm(without propellers)
- Weight: Toothpick style ductless 63g (without battery)
- Whoopick style ducted 79g (without battery)
- Receiver options:
- Frsky SPI receiver
- Flysky SPI receiver
- DSM2/DSMX compatible receiver
- Frsky XM+ receiver
- Frsky R-XSR receiver
- TBS Nano CRSF receiver
- Camera: Caddx Baby Turtle
Motor
- Mode: EX1203 KV6200
- Configu-ration:9N12P
- Stator Diamter:12mm
- Stator Length:3mm
- Shaft Diameter:Φ1.5mm
- Motor Dimension(Dia.*Len):Φ15mm*15mm
- Weight(g):4.7g
- No.of Cells(Lipo):2S-3S
FC
- (Frsky SPI RX version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR
- (Flysky SPI RX version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS
- (External RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX
- MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
- Sensor: MPU-6000(SPI connection)
- Board size: 28.5 * 28.5MM
- Power supply: 2-4S battery input (DC 7-17V)
- Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready
- Could add external receiver on the FC board
- Built-in Betaflight OSD(SPI Control)
- Built-in Current meter Max 70A
- Current meter scale set to 470
- Built-in 5V 1A BEC
- Built-in voltage detection
Propellers
- Brand Name:Gemfan
- Blades:2
- Material:PC
- Prop Disk Diameter:65mm
- Center Thickness:5mm
- Center Hole Inner diameter:1.5mm
- Max Prop Width:8mm
- Weight:0.3g
- Colors:black
- Package include 2cw+2ccw propellers
4-in-1 ESC
- MCU upgraded to EFM8BB21
- Power supply: 2-4S LiPo/LiPo HV (7v/17v)
- Current: 10A continuous peak 12A (5 seconds)
- Support BLHeliSuite programmable
- Factory firmware: F_H_40_REV16_7.HEX
- Default protocol: DSHOT600
VTX
- Output power: 25~200mw switchable
- Frequency: 40CH
- Input voltage: 3.3V 5.5V
- Current consumption: 300mA(type)
- Antenna: Micro UXII Antenna
- Frequency: 5.8GHz 5bands 40 channels
- With Race bandSmartaudio ready
- Weight: 3g
Caddx Baby Turtle
- TV system: NTSC/PAL changeable
- Video Resolution: 1080P@60fps / 1080P@30fps / 720@60fps
- Power Input: DC 4.5-20V
- Mini Illumination: 0.01lux
- Image Resolution: 2 Megapixels
- Working Current: 380mA@5V/160mA@12V (low consumption)
- OSD Menu: Yes (Support Voltage Display)
- Video Files: MP4
- Audio: Support
- Electronic Shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100
- S/N Ratio: >60dB (AGC OFF)
- Video Output: CVBS
- Max Micro SD Card Supported: 8-64GB(need Class 10 or above, recommend Class 10/UHS-I/UHS-II)
Lipo Battery
- Capacity:450mAh
- Voltage:11.4v
- Continuous Discharge Rate: 75C
- Size: 66mmx21mmx18mm
- Weight: 42gConnector: XT30
Video
Includes
- 1 x Larva-X HD frame (with Toothpick style canopy and Whoop style canopy)
- 4 x Whoop duct for Larva-X HD
- 1 x Receiver
- 4 x EX1203 KV6200 brushless Motors
- 4 x Propeller
- 1 x Caddx Baby Turtle
- 1 x VTX 5.8g 25mw~200mw switchable
- 2 x 3S 11.1v 450mah 75c Li-po battery
- 1 x 5.8g Micro UXII antenna
More Information
SKU | 13529 |
---|---|
Manufacturer | Happymodel |
NDAA Compliant | No |
Item Returns | This item can be returned |