Walksnail Avatar HD Mini 1S Kit
Walksnail Avatar HD Mini 1S Kit
In Stock
About this product
The Walksnail Avatar HD Nano Camera / Mini 1S Lite VTX Kit features a nano digital camera, antenna, and Mini Lite VTX (with heatsink) that works with HD Goggles such as the Walksnail Avatar and Fat Shark HD Dominator. This mini HD VTX combo has lower latency than the competitor at an average of 22ms, with an onboard DVR, 5.8GHz frequency, 8Gb internal storage, and a switchable aspect ratio.
Note: This improved version of the mini VTX board is smaller but still includes the heat sink. This kit includes the original nano camera, not the lite camera. The overall weight is 10g.
VIDEO: Walksnail Avatar Mini 1S VTX
Features
- Improved 5.1g Walksnail Avatar Mini Lite 1S VTX Module with Heatsink
- Lower latency than the competitor at an average of 22ms
- Walksnail Avatar Nano Camera
- Built-in 8Gb Internal Storage
- 1080p Screen Resolution
- The overall weight is 10g
- Switchable Aspect Ratio
- Walksnail Antenna
- 5.8GHz Frequency
- Onboard DVR
- Canvas Mode
- 170° FOV
- 3.1V - 5V
USE BULLETED FEATURE HERE IN BOLD CAPS.
Add additional feature descriptions here to describe the above.
USE BULLETED FEATURE HERE IN BOLD CAPS.
Add additional feature descriptions here to describe the above.
Specifications
AVATAR HD NANO CAMERA
- Resolution: 1080p 60FPS / 720P 120FPS / 720P 60FPS
- Aspect Ration: 16/9 and 4/3 Switchable
- Minimum Illumination: 0.001Lux
- Shutter Style: Rolling Shutter
- Dimensions: 14x14x17mm
- Cable Length: 90mm
- Image Sensor: 1/27"
- Field Of View: 170°
- Aperture: F 2.0
- Lens: 2.1mm
- Weight: 3.5g
AVATAR MINI LITE 1S VTX MODULE WITH HEATSINK
- Transition Power: FCC<25.5dBm / CE <14dBm / SRRC <20dBm / MIC <25dB
- I/O Interface: JST1.0 x 6 (Power In) to JST8 x 4 (USB)
- Operational Frequency: 5.725-5.850GHz
- Operating Temperature: -20° to 40°c
- Supported FC Firmware: Betaflight
- Dimensions: 30x30x6.5mm
- Antenna Connector: U.FL
- Bitrate: 25mbps/50mbps
- Mounting: 25.5x25.5mm
- Latency: 22ms Average
- Internal Storage: 8GB
- Input Voltage: 3.1-5V
- Weight: Approx 5.1g
- OSD: Canvas Mode
- Channels: 8
WALKSNAIL AVATAR VTX ANTENNA
- Radiation Efficiency: >= 98%
- Bandwidth: 5.6-5.9GHz
- Gain: 2dBi Average
- Polarization: LHCP
- Connector: U.FL
- Length: 90mm
- VSWR: <=1.4
- Weight: 1.5g
MFR#: WN04-1004S (New Version - 1.4.2022)
IMPORTANT NOTES
- Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."
Recommended (Not Included)
- (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")
Links
- (Insert links such as manuals, firmware, etc)
Includes
- 1x Walksnail Avatar HD Nano Camera w/ Avatar Mini Lite 1S VTX + Heatsink
- 1x Walksnail Avatar IPEX Antenna
- 1x 6-Pin Power Cable
- 2x M2 4mm Screws
- 1x 4-Pin USB Cable
Featured Videos
ADD VIDEO TITLE HERE IN BOLD CAPS
ADD VIDEO TITLE HERE IN BOLD CAPS
FPV Regulatory Notice
The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. GetFPV cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.
More Information
| SKU | 19943 |
|---|---|
| UPC (GTIN) | 724376347490 |
| Manufacturer | Walksnail |
| NDAA Compliant | No |
| Mounting Pattern | 25.5x25.5mm |
| Frequencies | 5.8GHz |
| Item Returns | This item can be returned |