BETAFPV A01 25-200mW 5.8GHz VTX
BETAFPV A01 25-200mW 5.8GHz VTX
Out of Stock
About this product
Tiny, light and durable A01 VTX, comes with a port to connect with FC and mounting holes to fix on the canopy, convenient for installation. Compatible with Beta75X FPV (3S), Beta75X HD (3S), Beta85X FPV (4S), Beta85X 4K and HX100.
Features
- Switchable power includes 0mW, 25mW and 200mW.
- SmartAudio function is included in this VTX. The flight controller can communicate with the video transmitter using the audio line in. It allows the flight controller to know what frequency the VTX is using, and to change it.
- PitMode is supported on this VTX.
- Dipole whip high sensitivity antenna. It is mounted to the VTX board durable.
|
Blue LED |
Red LED |
Power Status |
|
Flash Solid |
Off |
25mW |
|
Flash Solid |
Flash Solid |
200mW |
|
Off |
Flash Solid |
PitMode |
Specifications
- Output power: 0mW, 25mW and 200mW (Adjustable)
- Supply Voltage: 5V. NOT support connect to the 1S battery directly
- Weight: 2.0g
- Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
Recommended Parts
- Adapt Canopy: EOS2 Canopy, 4K Canopy
- Adapt Cable: Power Whoop Connector Cable Set
- Adapt Drone: Beta75X FPV (3S), Beta75X HD (3S), Beta85X FPV (4S), Beta85X 4K Whoop Drone, HX100.
How to Change Frequency, Channel & Power
Only support frequency and power change through the SmartAudio interface.
Method 1: Use the OSD menu.
Enter the OSD menu by radio transmitter sticks ( Pitch Stick UP and Yaw Stick Left). Then FEATURES -> VTX SA to change the frequency and power.
Method 2: Use the Betaflight GUI command.
We could also use the Betaflight CLI commands to change the frequency and power of the VTX.
For example, set the frequency to 5865 and power to 200mW ( 1 for 25mW / 2 for 200mW);
set vtx_band=1
set vtx_channel=1
set vtx_freq=5865
set vtx_power = 2
save
How to Use the PitMode
PitMode allows racers to power up their video transmitters during race events without interfering with other racers and still having the ability to change VTX settings or do some testing. The range is limited to 2-3m and transmission happens on the selected frequency.
The PitMode is active when only the red LED flash solid.
How to active the PitMode: Enter the OSD menu by radio transmitter sticks. FEATURES -> VTX SA -> CONFIG -> PIT FMODE. Then select the PIR status.
How to exit the PitMode
As the same above, select the OP MODEL to FREE to close the PitMode. Then the VTX will recover to the 25mW power status.
Transmission Frequency Table
This A01 VTX could support 3 frequency table according to your local law. The tables below are for all the frequency is valid.
USA frequency table below. The frequency in the red item is invalid.
Europe's frequency table below. The frequency in the red item is invalid.
Includes
- 1 x BETAFPV A01 5.8GHz VTX
- 1 x 5-Pin FC Cable
FPV Regulatory Notice
The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. GetFPV cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.
More Information
| SKU | 11347 |
|---|---|
| UPC (GTIN) | 032733835345 |
| Manufacturer | BETAFPV |
| NDAA Compliant | No |
| Frequencies | US: 1258, 1280 |
| Item Returns | This item can be returned |