FLYWOO's new EVO series aims to make AIOs the new thing in FPV and looking at the features, it is hard to resist everything on one board!

This AIO uses a powerful F745 BGA chip and BLHELI_32 ESC firmware, integrated 5V/9V dual BEC, barometer, black box, WS2812LED, supports 7 complete hardware serial ports, I2C, and other functions are available all on this 20x20 board.

Perfect for ultralight quads that need a low-profile 20x20 stack that doesn't skimp on features.

Note: Works for both DJI and analog FPV setups. Note wiring configuration at the bottom of the page.

Features

• F745 BGA chip and BLHELI_32 ESC firmware
• Supports 7 complete hardware serial ports
• Integrated 5V/9V Dual BEC
• Black Box Feature
• HM600VTX

Specifications

HDF745 EVO Flight Controller

• MCU: STM32F745 32-bit processor,216MHz, 512Kbytes Flash
• IMU: MPU6000 (SPI)
• Barometer: BMP280
• Onboard LED：WS2812*4
• USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
• 7 hardware UARTS (UART1,2,3,4,5,6,7)
• Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only.
• PPM and PWM receivers are not supported.
• Onboard 8Mbytes for Blackbox logging
• 9V Power Out: 1.5A max
• 5V Power Out: 2.0A max
• 3.3V Power Out: 0.5A max
• Dimensions: 41x32mm
• Mounting Holes: Standard 20mm square to the center of holes
• Weight: 8.5g

Built-in 40A BL_32 4in1 ESC

• Support BLheli / BLHELI_32
• Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600,Dshot1200
• Input Voltage: 2-6S Lipo
• Continuous Current: 40A
• Firmware: BLHELI_32

HM600 VTX

• Frequency: 5.8GHz 5 bands 37 channels
• Raceband: 5362-5945 MHZ
• Power: PIT/25/50/100/200/600mW switchable
• Control Mode: IRC(RX)/Button
• BAT: +7-28V Input
• Video System: NTSC/PAL
• Antenna: U.FL
• Size: 30.5mm×3.5mm×3mm
• Weight: 3g

Includes

• 1x Flywoo GOKU HDF745 EVO AIO 40A Stack + HM600 VTX