Mateksys GNSS SAM-M10Q GPS Module - Gallileo/GLONASS/BeiDouB1C
Mateksys GNSS SAM-M10Q GPS Module - Gallileo/GLONASS/BeiDouB1C
In Stock
About this product
The Mateksys GNSS SAM-M10Q GPS Module - Gallileo/GLONASS/BeiDouB1C uses a multi-constellation GNSS module powered by u-blox SAM-M10Q-00B. The SAM-M10Q features the u-blox M10 standard precision GNSS platform and provides exceptional sensitivity and acquisition time for all L1 GNSS signals. SAM-M10Q supports concurrent reception of four GNSS (GPS, GLONASS, Galileo, and BeiDou). The high number of visible satellites enables the receiver to select the best signals. This maximizes the position availability, in particular under challenging conditions such as in deep urban canyons. u-blox Super-S (Super-Signal) technology offers great RF sensitivity and can improve the dynamic position accuracy in non-line-of-sight scenarios.
The high-gain 15 x 15 mm2 patch antenna provides the best balance between performance and small size. The omnidirectional antenna radiation pattern increases flexibility for device installation.
Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)
VIDEO: Diatone Mamba H743 MK4 FC & 128K ESC Unboxing
Features
- The high-gain 15 x 15 mm2 patch antenna provides the best balance between performance and small size
- SAM-M10Q supports concurrent reception of four GNSS (GPS, GLONASS, Galileo, and BeiDou)
- The omnidirectional antenna radiation pattern increases flexibility for device installation.
- The high number of visible satellites enables the receiver to select the best signals
- Multi-constellation GNSS module powered by u-blox SAM-M10Q-00B
- U-blox Super-S (Super-Signal) technology offers great RF sensitivity
- Exceptional sensitivity and acquisition time for all L1 GNSS signals
- U-blox M10 standard precision GNSS platform
USE BULLETED FEATURE HERE IN BOLD CAPS.
Add additional feature descriptions here to describe the above.
USE BULLETED FEATURE HERE IN BOLD CAPS.
Add additional feature descriptions here to describe the above.
Specifications
- GNSS PPS LED, Green. (Solid ON after powering on, blinking(1Hz) when GNSS get 3D fix)
- Protocol: UBX(u-blox) 5Hz@GPS+GAL+BDS B1C+GLO or NMEA 1Hz
- GNSS u-blox SAM-M10Q-00B (GPS, GLONASS, Galileo and BeiDou)
- JST-GH-4P connector (SM04B-GHS-TB). 1.27mm pitch
- UART(TX, RX) interface for GNSS SAM-M10Q-00B
- Input voltage range: 4~9V (5V pad/pin)
- Operating Temperatures: -20~80 °C
- No Magnetic Compass built-in
- UART baudrate: 9600 default
- Patch antenna 15*15*4mm
- Power consumption: 10mA
- 26mm*16mm*8mm
- 7.5g
(INSERT ESC TITLE HERE IN BOLD CAPS)
(INSERT VTX TITLE HERE IN BOLD CAPS)
IMPORTANT NOTES
- Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."
Recommended (Not Included)
- (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")
Includes
- 1x Mateksys GNSS SAM-M10Q GPS Module - Gallileo/GLONASS/BeiDouB1C
- 1x JST-GH-4P to JST-GH-4P 20cm silicone wire
Featured Videos
ADD VIDEO TITLE HERE IN BOLD CAPS
ADD VIDEO TITLE HERE IN BOLD CAPS
More Information
| SKU | 20432 |
|---|---|
| UPC (GTIN) | 724376350438 |
| Manufacturer | Matek Systems |
| NDAA Compliant | No |
| Item Returns | This item can be returned |