The Flywoo GOKU GM10 Nano V3 GPS Module is an ultra-lightweight GPS module at just 2.2g! Featuring a 4-Pin connector pad.

Note: (Insert any product options here in black text with options in bold.)

Example: "Choose from two KV's: 1800KV (4S) or 2500KV (6S)."

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: DJI O3 Air Unit / FLYWOO GM10 V3 GPS Series test

• Ultra lightweight and small
• 4-Pin Pad
• PPS LED

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

PRE-TUNED AND PRE-SETUP

This RTF is fully built and test-flown by build technicians at our Florida facility.

• Dimension :12mm*16mm*4.5mm
• Connector : 4pins Pad
• Weight : 2.2g

Electrical Characteristics

• Receiving Format : GPS,GLONASS,Galileo,BeiDou,QZSS and SBAS
• Frequency : GPS L1,GLONASS L1,BeiDou B1,SBAS L1,Galileo E1
• Chipset : M10050(Tenth Generation Chip)
• Default Protocol : GPS,Galileo,BeiDou
• Channels : 72 Searching Channel

Sensitivity

• Reacquisition : -160dBm
• Tracking : -162dBm

Data and Update Rate

• Support Rate : 4800bps to 921600bps,Default 115200bps
• Data Protocol : BF4.3.X(UBLOX)/BF4.2.X(NMEA)
• Data Level : TTL or RS-232,Default TTL level
• Output frequency : 1Hz-10Hz，Default 10Hz

Operational Limits

• Acceleration : Less than 4g
• Altitude : 50,000m Max
• Velocity : 500m/s Max
  
  

Power consumption

• Operating temp :　-40 °C ~ +85°C
• Storage Temp : -40°C ~ +105°C
• VCC : DC Voltage ：3.3-5V

Indicator 

• PPS LED: yellow .PPS LED not bright when GPS not fixed,flashing when fixed
• The Module’s Pins: RX TX 3.3-5V GND

IMPORTANT NOTES

• BF4.2x and earlier firmware can only use NMEA protocol But there is no difference in performance between the two protocols
• INAV - Use the latest 6.0.0 configurator, the latest firmware above 5.0.0
• Only BF4.3x version firmware can use the Ublox protocol.
• The chip of GOKU GM10 V3 GPS is M1005.
• BETAFLIGHT - Use firmware above 4.3.0

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x GM10 NANO V3 GPS
• 1x 100mm Cable
• 1x Copper Foil

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS