Holybro X500 V2 ARF Kit

Holybro X500 V2 ARF Kit

Back Ordered

Only left for same day shipping. Order now!
Holybro X500 V2 ARF Kit
The X500 V2 ARF (Almost Ready-to-Fly) Kit by Holybro is an affordable, lightweight, and robust carbon fiber professional drone kit that is easy to assemble (less than 15 minutes).

About this product

The X500 V2 ARF (Almost Ready-to-Fly) Kit by Holybro is an affordable, lightweight, and robust carbon fiber professional drone kit that is easy to assemble (less than 15 minutes). It comes with the X500 V2 Frame Kit, motors, ESCs, power distribution boards, and propellers preinstalled. It is perfectly compatible with various flight controllers such as the Holybro Pixhawk series, Durandal, Pix32 V5, etc. There are numerous improvements compared to the previous model.

About the Frame 

The X500 V2 Frame Kit is made with full carbon fiber twill, with carbon fiber tube arms supported by the newly designed fiber reinforced nylon connectors with convenient notches on both motor and body sides, providing a much easier & more straightforward installation. The landing gear consists of 16mm & 10mm diameter carbon fiber tubes with connectors that have been thickened and strengthened.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: HolyBro X500 V2 Development Frame: Perfect for students and research

Features

  •  New design and minimal assembly time (~15 minutes)
  • Carbon Fiber frame with fiber-reinforced nylon connectors providing easy & straightforward installation
  • Pre-installed motors & ESCs with simple XT30 power plugs for PDB
  • Power distribution board (PDB) with XT60 & XT30 plugs - no soldering needed
  • Mount for companion computers such as Raspberry Pi & Nvidia Jetson Nano
  • Optional depth camera mount for Intel RealSense & Structure Core

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

Specifications

  •  Wheelbase: 500mm
  • Motor mount pattern: 16x16mm
  • Frame Body: 144x144mm, 2mm thick
  • Landing gear height: 215mm
  • Space between top and bottom plates: 28mm
  • Weight: 610g

IMPORTANT NOTES

  • Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

Recommended (Not Included)

  • Flight Controller - Pixhawk 6C, Pixhawk 6x, Pixhawk 5x, Pixhawk 4, Pixhawk 4 Mini, Durandal, Pix32 v5
  • Power Module - PM02D, PM03D Power Module, PM02 V3,
  • GPS - DroneCAN M8N/M9N GPS, Holybro M8N/M9N GPS, H-RTK M8P/F9P Rover Lite & Helical
  • Battery - 4S 2000-5000mAh Lipo

Includes

 

  • 1x X500 V2 Frame Kit 
  • With Preinstalled Items:

- Motors - Holybro 2216 KV920 Motor (4 pcs)
- ESCs - BLHeli S ESC 20A (4 pcs)
- 1045 Propellers (6 pcs)
- Power Distribution Board – XT60 plug for battery & XT30 plug for ESCs & peripherals

Featured Videos

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS

More Information

SKU 18284
UPC (GTIN) 764613346985
Manufacturer Holybro
Item Returns This item can be returned

Also Purchased

Holybro Micro M8N GPS Module
$44.99
Holybro Pixhawk 5X Standard Set + M8N GPS
$313.00
Out of Stock
Out of Stock
Holybro PM02D Power Module (For Pixhawk 5X and 6X)
$29.99
NEW
Holybro PM03D Power Module (For Pixhawk 5X and 6X)
$59.99
NEW