Holybro PM03D Power Module (For Pixhawk 5X and 6X)
Holybro PM03D Power Module (For Pixhawk 5X and 6X)
In Stock
About this product
The Holybro PM03D V1.1 Power Module provides a regulated power supply from the battery, current consumption and battery voltage measurements for any flight controller that uses I2C power monitor, such as the Pixhawk 5X and up - all through a 6-pin CLIX-Mate cable. The on-board switching regulator outputs 5.2V and a maximum of 3A from LiPo batteries up to 6S.
Note: This PM is not compatible with flight controllers that uses analog PM such as the Pixhawk4, Pixhawk4 Mini, pix32 v5, or Durandal flight controllers.
Features
- Selectable 8V or 12V TripleRow Pin Header for Powering Peripheral Device
- 5V/A Ports for Powering Companion Computer or Peripheral Device
- Onboard Voltage Regulator - Two 5.2V & One Selectable 8V/12V
- Solder Pads for Easy Motor ESC Connection
- Powers your Pixhawk® 5X or Newer Model
- Designed for Multi-Rotors like the X500 V2
- Pre-Installed XT-30 and XT-60 Connectors
- Plug & Play
Specifications
- Connections:
- 2x Triple row pin header (8V or 12V selectable by moving header jumper, 3A)
- JST GH 4pin (5.2V/3A, BEC shared with 5.2V triple row pin header)
- 2x Triple row pin header (5.2V/3A, BEC shared with JST GH 4pin)
- CLIK-Mate 2.0mm for flight controller (5.2V/3A standalone BEC)
- XT-30 for motor & peripheral device (battery voltage)
- Solder pads in each corner (battery voltage)
- Dimension: 84*78*12mm (excluding wires)
- XT-60 for battery
- Maximum input voltage: 6S battery
- Max current: 120A (<60 Sec)
- Max current sensing: 164A
- Mounting: 45*45mm
- Rated current: 60A
- Weight: 59g
Note: The XT60 plug and 12AWG wire that PM03D comes with is rated for 30A continuous current and 60A instantaneous current (<1 minute). If a higher current is being used, the plug type and wire size should be changed accordingly.
Links
Includes
- 1x Holybro PM03D V1.1 Power Module (for Pixhawk 5x or Newer)
- 1x 2.0mm Pitch CLIK-Mate 6pin Cable (To Power FC)
- 1x Electrolytic Capacitor: 220uF 63V (Pre-soldered)
- 1x 80mm XT60 Connector wire (Pre-soldered)
- 1x 4pin JST GH to Barrel Plug (2.1x5.5mm)
- 1x 4pin JST GH to Barrel Plug (2.5x5.5mm)
- 1x Hardware Set - Nylon Standoffs & Nuts
- 1x 4pin JST GH to USB Type C
- 1x 4pin Pin Dupont Cable (2pc)
More Information
SKU | 18006 |
---|---|
UPC (GTIN) | 764613344554 |
Manufacturer | Holybro |
NDAA Compliant | No |
Item Returns | This item can be returned |