The BetaFPV Meteor65 Pro (2022) comes with a 35mm propeller for power improvement and a flexible flying experience. Beyond that, it has almost the same components and features as Meteor65, like F4 1S 5A FC (2022) with built-in serial ExpressLRS 2.4G, Frsky, or TBS RX version, up to 350mW M03 VTX, 19500KV 0802SE motors, C03 FPV camera, etc, All aspects of performance are perfectly balanced.

2022 UPDATES

• New Micro Canopy reduces the influence of heat on the electronics
• Now Supports serial ELRS instead of SPI ELRS
• CO3 FPV Camera

Note: (Insert any product options here in black text with options in bold.)

Example: "Choose from two KV's: 1800KV (4S) or 2500KV (6S)."

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: BETAFPV Meteor65 PRO (2022 Update)

• Designed through an injection molding technique, the canopy is ultralight weight and is more durable, anti-ruin, and heat-resistant
• Built-in 1.52g ultralight weight and upgraded C03 FPV camera
• Two UART ports on F4 1S 5A FC (SPI Frsky) board
• 0802SE 19500KV motors and 35mm 3-blade props
• F4 1S 5A Flight Controller (Serial ELRS 2.4G)

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

PRE-TUNED AND PRE-SETUP

This RTF is fully built and test-flown by build technicians at our Florida facility.

• Canopy: Canopy for Micro Camera / Canopy for Micro Camera 2022 Version
• FC&ESC: F4 1S 5A FC (Serial ELRS 2.4G)/F4 1S 5A FC (SPI Frsky)
• Frame: Meteor65 Pro 65mm 1S Brushless Frame
• Item: Meteor65 Pro 1S Brushless Whoop (2022)
• Props: 35mm 3-blade props (1.0mm Shaft)
• Battery: BT2.0 300mah 1S Battery
• Motors: 0802SE Brushless Motor
• Weight: 23.01g (without battery)
• Tilt: 30° (default)/20° (optional)
• VTX: M03 25-350mW VTX
• Camera: C03 FPV Camera
• Flight time: 4.5 mins

IMPORTANT NOTES

• The DJI Remote Controller is recommended for beginners but NOT required to use the FPV System, since you won't need to set up another receiver. If you don't have the DJI Remote Controller, you will need a receiver for your transmitter. and then bind to your own radio as usual.
• If you do not have the frsky transmitter, please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.
• Our current frsky receivers default version in 2.XX, requires us to use of the same version of frsky transmitter. 

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

• FC Firmware and CLI Dump File

• 1x BetaFPV Meteor65 Pro Brushless Whoop Quadcopter (2022)
• 2x 300mAh 1S 30C Battery with BT2.0 connector
• 1x 35mm 3-Blade Props (Set of 4) - 1.0mm Shaft
• 1x BT2.0 Battery Charger and Voltage Tester
• 1x 20° Lens Camera Mount for C03 Camera
• 1x 30° Lens Camera Mount for C02 Camera
• 1x Customized Carry Case
• 1x TypeC USB cable
• 1x Screwdriver 

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS