The Meteor65, a perfect 1S whoop drone for indoor flying (especially during winter). It is equipped with the new BT2.0 connector, super-light F4 1S FC, and 0802SE 22000KV motors! With a stronger and powerful powertrain, you’ll immediately notice how much better this 1S 22.84g whoop is on takeoff.
Compared to older 1S whoops, you'll be amazed at the control and power of the Meteor65.
Note: BETAFPV has discontinued the Glow-in-the-dark Lumenier Edition. All new stock will be the regular version from BETAFPV.
Note: T-Antenna is only included in the TBS Rx version.
- Meteor65 is the first generation whoop drone powered by a brand-new BT2.0 1S battery. The BT2.0 connector effectively decreases internal connector resistance for a much better discharge performance compared with the initial PH2.0 connector.
- Flight controller pre-soldered the BT2.0 cable, which can provide a more stable and powerful 9A continuous current and 15A burst.
- For minimizing weight and optimal performance, it applies the perfect lightest combo with F4 1S AIO FC and C01 camera.
- By using the latest 0802SE 22000kv motors and 31mm 3-blade props, this kit provides you a completely different experience of a powerful indoor flight.
- Meteor65 lower profile frame is reduced by 0.75g to 3.08g only. The battery slot is closer to the center of gravity for a smoother flying experience, and you will land on the motor screws instead of the battery.
- The package comes with 2 lipo batteries, a BT2.0 charger & tester, an extra 1 set of props, 1 screwdriver, and a portable bag. Meanwhile, we have also released a BT2.0 Battery charger for your needs.
- Item: Meteor65 1S Brushless Whoop
- Weight: 22.84g (without battery)
- FC&ESC: F4 1S AIO FC
- Frame: Meteor65 65mm 1S Brushless Frame
- Motors: 0802SE 22000kv Motors
- Props: 31mm 3-blade props (1.0mm Shaft)
- Camera: C01 Camera
- VTX: Integrated 25mW VTX
- Receiver Option: Frsky XM / DSMX
- Battery: BT2.0 300mah 1S Battery
- Flight time: 0802SE 22000KV motor version: 1:30min-2min
BETAFPV exclusive designed BT2.0 connector has broken through the bottle-neck of PH2.0 connector. BT2.0 connector decreased internal resistance of connector effectively to allow more current that is transferred, which means it supports 9A continuous current(15A burst) offers stronger power and longer flight time on 1S brushless drones while PH2.0 just supports 4.5A You can enjoy more flight time without disturb of low voltage warning through solving the problem of voltage sag. There are a host of accessories now to help convert pilots from PH2.0 to BT2.0.
There is a graph of comparison between BT2.0 connector and PH2.0 connector (solid pins version) in BETAFPV 1S 300mAh battery. The discharge current is 9A in this testing. You could see that it has double the time ( about 2 minutes) with a BT2.0 connector.
We know some pilots might have a question about how to deal with the old PH2.0 1S battery. So we provide some accessories like BT2.0 Power whoop connectors for those people who wanna convert the PH2.0 connector to BT2.0 connector. Much more choices and more convenient in installation.
F4 1S AIO FC (SPI Rx) integrates 4 components as F411 FC, 5A ESC, 25mW VTX and SPI receiver. It is ultralight only 3.92g and still maintains an amazing performance capability, which makes it become your best choice to run with a 1S brushless quad!
F4 1S AIO FC (No Rx) integrates 3 components as F411 FC, 5A ESC and 25mW VTX. It supports external receivers like TBS Crossfire, Frsky XM+, and Spectrum DSMX, etc.
In this quad, the Frsky & Futaba Version is equipped with F4 1S AIO FC (SPI Rx), and the TBS & PNP Version is equipped with F4 1S AIO FC (No Rx) with an external Receiver.
0802SE 22000KV Motor is a lightweight 1S motor, compared with the 0802 series brushless motors, it is not only significantly reduced the weight which is only 1.83g/pc but also ensuring the awesome performance of power and thrust. Lead wire soldered to the PCB, which allows you to repair it easier once it disconnected.
C01 Camera is the lightweight camera customized for the weight-sensitive micro whoop drones, perfectly fits the Meteor65. Adapted a 1/4'' CMOS sensor, 2.1mm lens for 800TVL resolution, and excellent latency while minimizing the weight to 1.4g. Packed with the micro canopy, protect your camera well in a hard crash.
Meteor65 1S Brushless Frame
The lightest 65mm frame- Meteor65 frame is reduced 0.75g to 3.14g only. The battery slot is closer to the center of gravity for smoother flying experience, and you will land on the motor screws instead of the battery. We provide more options on colorful frames as Beta-blue, mint-green, sakura-pink, mango-orange, etc.
- 1x Meteor65 Brushless Whoop Quadcopter (1S)
- 2x 300mAh 1S 30C Battery with BT2.0 connector
- 1x BT2.0 Battery Charger and Voltage Tester
- 1x Customized Carry Case
- 1x Spare 31mm 3-Blade Props (1mm Shaft)
- 1x Screwdriver
- Additional Information
SKU 11517 Manufacturer BETAFPV UPC (GTIN) No