The AOS LR5 Frame Kit is an ultralight 5-inch frame optimized for 2-blade props and 2004 and similar size motors. It offers a geometry that has been optimized for vibration and resonance performance whilst keeping props out of view making it ideal for 5" long-range or ultralight freestyle flying. The frame has flexible mounting for 30.5x30.5, 25.5x25.5, and 20x20 mm electronics including the HDZero 1W VTX, DJI Air Unit, and Caddx Vista. This combination provides plenty of thrusts to carry large Li-Po packs (~1500mAH 4S or ~1000mAh 6S) or a 6S 28650 Li-ion pack for the longest flight durations.

FROM THE PILOT

"When I set out to create a bind and fly version of the AOS 5 V2 I had the vision to combine the latest and greatest technology into the ultimate FPV freestyle machine. This is the result."

- Chris Rosser, AOS RC

Choose a Size:

• 3.5"
• 5"
• 5.5"

Note: This is the frame kit only. electronics are not included.

VIDEO: A 5" Long Range FPV frame with no props in view and space for the DJI Air Unit?! The AOS LR5

• One 25.5 or 20 mm mounting up front and one 30.5, 25.5, or 20 mm mounting in the rear (2 stack configuration)
• Supports HDZero 1W VTX or DJI Air Unit in the rear
• 1.5mm Sandwich, Top, and Bottom Plates
• Optimized Micro Sized Camera Protection
• Optimized truss design arms
• Ideal for Long-Range Flights
• Durable Carbon Fiber
• No props in View
• Built by iFlight
• 5mm Arms

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

• Mounting Patterns: One 25.5 or 20 mm mounting up front and one 30.5, 25.5, or 20 mm mounting in the rear (2 stack configuration)
• Plate Thickness: 1.5 mm Top Plate, Bottom Plate, and Sandwich Plates
• Stack Configuration: One central 25.5 or 20 mm stack
• Supports: HDZero 1W VTX or DJI Air Unit in the rear
• Camera Size: Fits 19 mm and 20 mm cameras
• Compatible Prop Size: 5" Bi-blade props
• Arm Thickness: 5 mm Arms
• Size: 5"

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

• 4S ~800mAh or 6S ~500mAh w/ XT30
• Caddx DJI Digital HD FPV Air Unit Kit
• 30A or higher toothpick AIO
• 2004 motors

•   (Insert links such as manuals, firmware, etc)

• 2x AOS RC LR5 Camera Plate
• 1x AOS RC LR5 Bottom Plate
• 1x AOS RC LR5 X Plate Kit
• 1x AOS RC LR5 Top plate
• 4x AOS RC LR5 Arm - 5"
• 2x iFlight LiPo Strap
• 1x Hardware Kit
• 2x Battery Pad

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS