Zeez Design Racing LED Combo - F7 FC + LED System

The Zeez Design Racing LED Combo comes with the Zeez F7 FC and the Zeez LED System. This combo features one of the smallest RBG strips for racing drones on the market and is fully controllable from the FC firmware (BetaFlight or INAV). 

Specifications

Zeez F7 Betaflight FC 

• Up to 8S input (max 36V)
• 5V BEC up to 3A continuous
• STM32F722 MCU
• MPU6000 Gyro/ACC for smooth performance
• 128MB OnBoard flash
• OSD chip Onboard
• 6 available UARTS
• VTX switch to control the ON/OFF of the VTX
• directly from your transmitter
• LC Filter for 5V VTX
• USB Type C connector
• Onboard RGB LED distribution for clean wiring to the LED on the arm of the quad.
• Notch design on sides and in the front of the – FC for better fitting on the frame.
• User Manual
• BetaFlight 4.1 Firmware
• Betaflight OSD Custom Logo

Zeez LED System 

• Zeez Led System includes 4 strips of RGB led light
• 10 RBG Led on each strip
• Max Current Draw (10 led on white color): 0.6A @ 5V
• Easy wiring to Zeez F7 Flight controller and easy control with BetaFlight
• Dimension 35mmx7.5mm (the smallest RBG strip for racing drone on the market)

Includes

• 1 x Zeez F7 Flight Controller
• 1 x Zeez Led System (4 led Strip)
• 4 x Aluminum Standoff
• 4 x Aluminum Nut
• 2 x ESC to Flight Controller 8 Pin JST SH 1.00mm connector
• 6 x Led Strip to Flight Controller 3 pin JST SH 1.00mm connector
• 2 x 470uF 35V Low ESR Capacitor
• 2 x 2.00mm Header Pin for VTX connection
• 2 x 2.54mm Header Pin for Receiver connection
• 2 x Spare M3 rubber anti-vibration for Flight Controller or ESC