Walksnail Avatar HD Kit V2 - 8GB - No Gyro
Walksnail Avatar HD Kit V2 - 8GB - No Gyro
About this product
This Walksnail Avatar HD Kit V2 features built-in 8GB storage. The 2K/120fps/4:3 native sensor camera allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images. The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with ultra-low latency. Other features include an updated PCB board, an updated outer shell, low latency of 22ms, and a 4Km range.
Note: This kit does not include gyro.
VIDEO: Walksnail Avatar HD Pro Kit + Avatar HD Kit
Features
- Optimized antenna base design and frequency button position for greater convenience
- The only native 4:3 high-definition sensor in the FPV industry
- Updated the design of the PCB board and outer shell
- The spare pad provides two power connection modes
- 2K pixel, 120fps, 4:3 native sensor
- 20*20mm mounting holes
- 1080P 120fps HD FPV
- 160° wide-angle FOV
- F/2.0 Large Aperture
- 8GB built-in storage
- Lightweight design
- GPS anti-jamming
- 22ms low latency
- Ranging Mode
- 4KM range
- 6V-25.2V
USE BULLETED FEATURE HERE IN BOLD CAPS.
Add additional feature descriptions here to describe the above.
USE BULLETED FEATURE HERE IN BOLD CAPS.
Add additional feature descriptions here to describe the above.
Specifications
- Resolution: 1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility;
- Image Sensor: 1/3.2-Inch 4Mp 4:3sensor
- Min.Illumination: 0.001Lux
- Dimensions: 19*19*22mm
- Gyroflow: non-supported
- Coaxial Cable: 140mm
- Shutter Rolling shutter
- Ratio: 4:3 native /16:9
- Aperture: F2.0
- Lens: 2.1mm
- Weight: 7.2g
- FOV: 160°
AVATAR V2 VTX
- Transmitter Power (EIRP: FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm
- Supported FC System: Betaflight; Inav; Fettec; ArduPilot;Kiss
- 1/O Interface: JST1.0*4(Power in)JST0.8*6(USB)
- Communication Frequency: 5.725-5.850GHz
- Mounting Holes: 25.5*25.5mm; 20*20mm
- Operating Temperature: -20-40℃
- Dimensions: 33.5*33.5*10.5mm
- Latency: Average delay 22ms
- Wide Power Input: 6V-25.2V
- Model: Avatar V2 module
- Recording: 1080p/720p
- OSD: Canvas mode
- Antenna: 1(IPEX)
- Weight: 17.6g
- Storage: 8GB
- Channels: 8
AVATAR V2 ANTENNA
- Frequency range: 5600MHz-6000MHz
- Size: R15 X 45mm(without cable)
- Input Impedance: 50Ω
- Polarization: LHCP
- Interface: IPEX-1
- Gain: 1.9dBi
- VSWR: ≤1.5
- Weight: 2g
IMPORTANT NOTES
- Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."
Recommended (Not Included)
We recommend that when using more than 2s power to use a standalone BEC in between the VTX and power source to conserve the integrity of sensitive electronics;
Links
- (Insert links such as manuals, firmware, etc)
Includes
- 1x Walksnail Avatar HD VTX V2 - 8GB - No Gyro
- 1x Walksnail Avatar HD Camera V2
- 1x Walksnail Avatar Antenna V2
- 1x USB transfer extension cable
- 4x M2*5*0.5mm gasket
- 1x 4 Pin silicone cable
- 4x M2*14mm screws
- 8x M2*4mm screws
- 4x M2*5mm screws
- 4x M2*6mm screws
Featured Videos
ADD VIDEO TITLE HERE IN BOLD CAPS
ADD VIDEO TITLE HERE IN BOLD CAPS
FPV Regulatory Notice
The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. GetFPV cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.
More Information
SKU | 20439 |
---|---|
UPC (GTIN) | 724376348879 |
Manufacturer | Walksnail |
NDAA Compliant | No |
Mounting Pattern | 20x20mm |
Frequencies | 5.8GHz |
Item Returns | This item can be returned |