Welcome to GetFPV My Account My Wishlist Log In

Turnigy Multistar Elite 2204-2300KV Multi-Rotor Motor (CW Prop Adapter)

More Views

Turnigy Multistar Elite 2204-2300KV Multi-Rotor Motor (CW Prop Adapter)
The Turnigy Multistar Elite Outrunners are designed for maximizing Multi-rotor performance!
Out of Stock

The Turnigy Multistar Elite Outrunners are designed with one thing in mind - maximizing Multi-rotor performance! The new Multistar Elite motors are the new standard in Multirotor performance. Each Elite motor is built for a specific type/application allowing for further refinement and efficiency/power to be optimized.

Multistar Elite motors are more than a fancy name and new dark green color.. Built using the highest quality components from Japan bearings, N45SH magnets, .2mm laminations, 180deg oxygen free copper wire, .005g balancing, perfect wind laid down and 100% QC, and then the design of each motor are also evaluated for their type application and everything from their mounting, to the prop type adapters are taken into consideration. The Elite motors are truly works of art

The Elite 2204~2300kv is a precision little gem of a motor designed for the mini range of multi-rotors and optimized for a 5inch prop, perfect for those tighter frames where 5inch props is the maximum. The 2204 has a removable/replaceable knurled prop shaft for those occasional crashes, lol.. And is available in CW/CCW flavors with matching bullet hardware. The lower motor frame is chamfered for easy fitment on tighter frames and has plenty of height for mounting hardware to winding clearance.

Multistar Elite is unmatched in quality and value, and the performance speaks for its self.


  • Japan Bearings
  • N45SH Magnets
  • 2mm Laminations
  • 180deg oxygen free Copper wire
  • .005g Or better balancing
  • Perfect laydown windings
  • 100% QC
  • Replaceable CW/CCW prop adapter


  • KV(RPM/V): 2300KV
  • Lipo cells: 2~3
  • Max current: 126.5w
  • Max Amps: 11.5A
  • No Load Current: 0.6A/10V
  • Internal Resistance: 0.125 ohm
  • Number of Poles: 12/14
  • Dimensions(Dia.xL): 22×4 mm
  • Motor Shaft: 3mm
  • Prop shaft: 5mm CW prop adapter
  • Weight: 24g
  • bolt hole spacing: 16*19 M3
  • Lamination thickness: .2mm
  • Magnets: N45SH
  • Balancing spec: .005g
  • Wire: 180deg oxygen free
  • Connector: 2mm bullet
Additional Information
SKU 4437
Manufacturer Turnigy
Static Block No
Popo Compatible No

Also Purchased