TrueRC X²-AIR 5.8GHz MK II Antenna Pair for HDZERO VRX4

TrueRC X²-AIR 5.8GHz MK II Antenna Pair for HDZERO VRX4

Select options for stock status

Only left for same day shipping. Order now!
Earn

Options

TrueRC X²-AIR 5.8GHz MK II Antenna Pair for HDZERO VRX4
A pair of TrueRC X²-AIR 5.8GHz MK II Antenna (HDZERO VRX4) for the HDZero VRX - Digital HD Receiver Module.

About this product

A pair of TrueRC X²-AIR 5.8GHz MK II Antenna (HDZERO VRX4) for the HDZero VRX - Digital HD Receiver Module. Slide on the antennas on the module’s rails and screw on the custom knurled SMA connectors to obtain 13dBic gain combined with a healthy flyable beam width of 165deg. Paired with TrueRCs OCP Omni Antennas to yield an amazing flight experience in a compact and low-profile package! 

More gain and more convenience! 

Note: VRX is NOT Included

VIDEO: (Insert Video Title here in Bold)

Features

  • Circularly Polarized
  • Sector-type beam shape (widest on horizontal)
  • Mount direct on the HDzero module with included slide-on mounts.
  • Compact low-profile design, easy to store and transport
  • High 13 dBic for unsurpassed long-range and signal penetration
  • Large SWR and axial ratio bandwidth, work even out of the 5.8GHz band
  • Super wide 150-degree beam for each antenna combined with 165deg beam width
  • Custom knurled SMA connectors 

Dual Elements Array Provide 13Dbi Circular Polarized Beam of 75deg

By combining the two elements onto a single feed, the gain is boosted and horizontal coverage is widened by compromising the vertical coverage which isn’t used much in FPV.

Low Profile Design, Only 15mm Thick

Most compact antennas of this gain level at only 15mm thickness, letting you leave them on at all the time without fear of breaking them. The included double-sided foam tape give a solid bound to your goggles’s face plate and install in minutes.

Custom Made SMA Connectors, fit the HDzero 

As with all other components of X²-AIR antennas, the custom SMA connector is made to the highest standards to fit your HDzero module perfectly and make sure every bit of RF power is transferred from the X²-AIR. A knurled finish provide easy tightening and a quality look exclusive to TrueRC.

Pair With OCP Omni Antennas

Pair with OCP omni-directional antennas for a complete antenna system

Specifications

  • Bandwidth: 5.1GHz-7.0GHz
  • Gain: 13 dBic
  • Polarization: LHCP or RHCP
  • Beam-width Horizontal*: 150deg
  • Beam-width Vertical*: 62deg
  • Hor. beam @-3dB**: 75deg.
  • Vert. beam @-3dB**: 34deg.
  • Connector: Custom knurled SMA
  • Dimension: 72mm x 34mm x 15mm
  • Weight: 20g each
  • Include mounts for installation onto the HDzero module.

IMPORTANT NOTES

  • *Coverage of individual antenna where reception is at least equivalent to an omni.
  • **Coverage of individual antenna where at least 70% of the max range is obtained.

Recommended (Not Included)

Links

  •   (Insert links such as manuals, firmware, etc)

Includes

  • 2x TrueRC X²-AIR 5.8GHz MK II Antenna Pair for HDZERO VRX4
  • 2x Side Mounts

Featured Videos

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS

More Information

SKU 19764
Manufacturer TrueRC
NDAA Compliant No
Antenna Connector / Length SMA
Antenna Frequency 5.8GHz
Item Returns This item can be returned

Also Purchased

HDZero Whoop Lite VTX
$64.99