The Speed Addict SuperLight was forged out of beautiful carbon fiber and aluminum by the FPV gods and then transported to this planet for the soul purpose of beating the crap out of everyone else on the race track. On the day of it's arrival on earth all the Gram Chasers and Weight Nazi's gathered around to behold it's greatness. Today will forever go down in the FPV history books as the day Catalyst Machineworks entered the super light weight frame world. Do you find yourself wondering if clear shrink tubing is lighter than black shrink tubing? Do you put your quads on a diet of no ESC plugs, 400mah lipos, and super short wiring runs all the while telling your friend his 200 gram AUW quad 3" is a fat ass? Welp, this frame is for you!

The SuperLight is an XL frame. Meaning it is a stretched 'X' frame. The left / right side props have been pulled in towards craft centerline as close as possible, while the front / back props have been stretched away from each other. This is a wonderful geometric scenario for racing applications. The extended length allows for more stable and controllable pitch, which translates into more control of speed and altitude. The tightly packed frame width translates into lightning fast roll maneuvers. When you combine this positioning of the motors and the SUPER LOW frame mass its a recipe for world domination.

This machine is perfect for a professional FPV pilot looking to put down the fastest ever MultiGP UTT time or the new guy just getting into FPV racing who has no idea what in the world the previous two paragraphs mean. The SuperLight is easy to build and tough as nails!

Features

• Super light frame
• Sub 150 gram AUW (no lipo) possible 
• Tough as nails
• 130mm XL frame geometry 
• Easy to build
• Easy to maintain 
• Fits 20mm x 20mm or standard 30.5mm x 30.5mm FC's 
• Knurled silver anodized standoffs 
• Multiple Vtx / FPV antenna mounting options
• Innovative Vtx / FPV antenna mount made of flexible TPU. 
• Catalyst Machineworks unmatched quality materials 
• Catalyst Machineworks unmatched quality fasteners
• Catalyst Machineworks unmatched performance 
• Catalyst Machineworks unmatched customer support

Specifications

• 29 grams (fully dressed with all hardware and 3D parts)
• 27 grams (no VTX mount or atenna mount)
• Material: Twill Weave 3K Gloss CF
• Bottom plate: 2.5mm thick
• Top plate: 1.5mm thick
• Frame Type: XL
• Frame Size: 130mm
• Motor pad mounting holes: M2 on 12mm bolt circle
• Motors supported: 1306 or 1407 
• Lipos supported: 3s, 4s, 5s 
• Lipo sizes supported: 400mah to 1000mah
• Lipo mounting position: Bottom
• Fits 3" props
• Included 3D plastic parts color: Black (other colors sold separately)

Includes

• 1 Main Base Plate (2.5mm CF)
• 1 Upper Fuselage Plate – mini FPV cam (1.5mm CF)
• 4 Plastic Spacer (Black plastic M3 hole x 7mm OD x 2mm long)
• 4 Hex Standoff 'Male – Female' (Black plastic M3 thread x 6mm long)
• 4 Phillips Head Screw (Black plastic M3 thread x 6mm long)
• 4 Phillips Head Screw (Black plastic M3 thread x 10mm long)
• 4 Nut (Black plastic M3 thread)
• 4 Washer (M3 Hole x silver aluminum)
• 2 Washer (M2.5 Hole x steel)
• 1 VTX Antenna Mount (Black 3D Printed TPU)
• 1 RX Antenna Mount (Black 3D Printed TPU)
• 1 Mini Cam Mount Base (Black 3D Printed TPU)
• 1 Mini Cam Mount Top (Black Injection molded plastic)
• 1 Mini Cam Mount Hardware Set (Includes various screws and nuts)
• 2 Antenna Tube (Black Plastic)
• 4 Frame Standoff (M3 x 23mm long x knurled silver aluminum)
• 8 Socket Head Screw (M3 x 10mm long x silver 7075 aluminum)
• 6 M2.5 X 4.5mm OD x 3mm Long Spacer (Aluminum)
• 1 Velcro Lipo Strap – Catalyst Machineworks

* Download Manual