The SkyStars Fly Stack features a H743 Dual Gyro HD Flight Controller and a Kramam 60A BLHeli_32 4-in-1 ESC with a 30x30 mounting pattern.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in Bold)

ESC

• Excellent over-current capability.  Adopts the best PCB material and PCB production process - such as application of high TG materials, 3oz copper PCB & 2μm gold deposition process on PCB.  6-layer layout design of the board, compared with other common 4 layers.  Can withstand bigger currents.
• Extremely stable support of 6S LiPo battery by use of 24 pcs of new Toshiba standard 40V 5x6 Mosfets & imported from USA or Japan electronic materials. Advanced lead-free SMT Processing technology makes ESC fully support 6s battery and get better performance.
• Excellent heat dissipation performance.  The CNC hollow aluminum alloy shell is great for heat dissipation.
• Better control performance - flashed with the latest BLHeli_32 firmware in the factory, support telemetry functions (including voltage, RPMS & current )

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

H743 HD FC

• MCU: STM32H743VIT6, 480MHz, 1MB RAM, 2MB Flash
• Gyro: BMI270 dual
• Baro: BMP280
• OSD: AT7456E
• Blackbox: 16M
• 8x Uarts (1,2,3,4,6,7,8) with built-in inversion.
• 8x PWM outputs
• 1x I2C
• 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
• USB Type-C(USB2.0)
• 2x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
• 1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
• Dual Camera Inputs switch
• VTX 10V/Vbat filtered power ON/OFF switch
• DJI FPV OSD is supported by any spare UART
• Vbat Input: 7~25V (2~6S LiPo)
• BEC: 5V 2A Continuous (Max 3A)
  LDO 3.3V: Max 250mA
• Firmware: Betaflight - SKYSTARSH7HD
• Mounting: 30.5 x 30.5mm
• Dimensions: 39.5 x 39.5 x 7.8 mm
• Weight: 10.1g

KM60 60A BLHeli_32 4-in-1 ESC - 30x30

• Input voltage: 3-6S LiPo
• Con.Current: 60A
• Peak Current: 80A≥ 10S
• Firmware: BLHeli_32
• Support: Dshot 600/1200
  Mounting hole: 30.5mm/M3
• BEC: No
• Product size: 41*46*7.6mm
• Weight: 18g

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x Skystars Fly Stack - H743 Dual Gyro HD FC + KM60 60A BLHeli_32 4-in-1 ESC - 30x30

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS