The SkyStars Fly Stack features an F722 Mini HD Pro Flight Controller and a Kramam 55A AM32 32Bit 3-6S 20×20 4-i-n1 ESC with a 20x20 mounting pattern.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in Bold)

• Designed the LED installation position in the four corners, supporting WS2812 Programable LED.
• Supports serial receivers (SBUS, iBus, Spektrum, Crossfire,). Support 3.3V Satellite Receiver.
• High-performance / low-noise / high-sensitivity IMU. BMI with 6-axis gyro and accelerometer.
• Support connect DJI HD air module.
• Input voltage 12V-26V (3-6S)
• TVS protect.
• Automatic voltage monitoring.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

F722 FC

• MCU: STM32F722RGT6 216MHz
• IMU: BMI270 (SPI)
• OSD: Betaflight OSD & DJI HD OSD (UART6)
• 6 hardware UARTS (UART1,2,3,4,5,6)
• 5V 2A & 10V 2A
• Input Voltage: 3-6S Lipo
• Blackbox: 16MB
• Barometer: YES
• Firmware: SKYSTARS F7HD
• Dimensions: 35x28x7mm
• Mounting Holes: Standard 20mm/M3 square to the center of holes
• Weight: 4.2g

55A 4IN1 ESC

• Voltage: 3-6S LiPo
• Con.Current: 55A Peak
• Current: 70A≥ 10S
• Firmware: AM_32
• Support : Dshot 600
• Mounting hole : 20X20 mm/M3
• BEC: No
• Product size: 35*47*6.5mm
• Weight: 16.5g

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x Skystars Kramam 55A AM32 32Bit 3-6S 20×20 4in1 ESC
• 1x Skystars F722 Mini HD Pro Flight Controller 20×20mm

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS