The SkyStars F7+ KO45 Blheli_32 Fly Tower Stack features the SkyStars F7 HD flight controller, as well as the KO45 45A 4-in-1 ESC to give your multirotor full power!

Note: There is no difference in appearance between the 45A and 60A ESC, which can be distinguished from the MOS tube.

Specifications

Skystars KO45 45A BLHELI_32 4-in-1 30X30 ESC

Features

Excellent over-current capability

By adopting the best PCB material and PCB production process. Such as application of high TG materials, 3oz copper PCB & 2μm gold deposition process on PCB. Together with a 6-layer layout design of the board, compared with others that commonly use 4 layers, allowing it to withstand higher current.

Extreme stability and support of 6S LiPo battery

By use of 24 pcs of new Toshiba standard 40V 5x6 Mosfet & electronics imported from USA and Japan.  Plus advanced lead-free SMT Processing technology. It makes ESC fully support the 6s battery and get better performance.

Better Control Performance

Flashed with the latest BLHeli_32 firmware in factory, support telemetry functions (including voltage, RPMS, & current )

Specifications

• Dimension: 41*46mm
• Mounting Holes: 30.5*30.5mm/¦µ3mm
• Weight:13.3g
• Supports 3-6S Lipo input
• BB21 MCU, 48Mhz Runs BLHELI 16.X Firmware
• Current sensor: YES
• BEC: NO
• Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
• Target: Q-H-30 BLS 16.7
• MOS tube model is QN3019M6
• BLHeliSuite download

SkyStars F7 F722 Flight Controller

• Brand Name: Skystars
• Model: F722 HD
• Item Name: F7 OSD 3-6S Flight Controller
•  MCU: STM32F722RGT6 216MHz
• IMU: MPU6000 (SPI)
• OSD: Betaflight OSD & DJI HD OSD (UART6)
• BEC Output: 5V 3A & 10V 3A
• Input Voltage: 3-6S Lipo
• Blackbox: 8MB
• Firmware: SKYSTARS F7HD
• 6 hardware UARTS (UART1,2,3,4,6)
• Dimensions: 38.5x40x6.2mm
• Mounting Holes: Standard 30.5mm square to the center of holes
• Weight: 6.2g

Wiring Diagram

Includes

• 1 x SkyStars F7 F722 Flight Controller
• 1 x SkyStars RC KO45 45A BLHELI_32 4-in-1 30X30 ESC