With the intention of building a durable, lightweight HD brushless whoop, GEPRC finally came out with the Thinking P16 HD! This is the latest whoop style quad from GEPRC, which integrates a RunCam Link Wasp system. With only the size of your hand and HD footage transmission, Thinking P16 HD brings the enjoyment of flying a whoop-style quad to a whole new level.

Thinking P16 HD comes with the GEP-12A-F4 AIO which is a highly integrated and stable board that weighs only 5.6g. GEP-12A-F4 AIO gives you confidence while you are trying to push your Thinking P16 HD to its limit. GR1103 8000kv motors and 1.6’’ props give Thinking P16 HD a stable but responsive flying characteristic. This highly efficient powertrain gives you 4 minutes of indoor acrobatics.

Just like all other GEPRC quads, Thinking P16 HD has been pre-tuned and fully assembled by the GEPRC team before you receive it! Simply bind it to your transmitter or attach your favorite receiver, then you are ready to enjoy your all-new Thinking P16 HD.

Note: (Insert any product options here in black text with options in bold.)

Example: "Choose from two KV's: 1800KV (4S) or 2500KV (6S)."

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

• Whoop style frame with prop guards. Safe to fly indoors and around soft objects.
• RunCam Link Wasp brings HD FPV experience in tiny package.
• A High-efficiency powertrain provides 4 minutes of indoor flying.
• Stable GEP-12A-F4 AIO flight control with Betaflight OSD.
• Compact design, 79mm from the motor to motor.
• Weighs only 64g w/o battery and receiver.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

PRE-TUNED AND PRE-SETUP

This RTF is fully built and test-flown by build technicians at our Florida facility.

THINKING P16 WHOOP

• Receiver:Without Receiver(PNP)/ TBS NanoRX
• Flight Controller:GEP-12A-F4 AIO
• Camera: RunCam Wasp Micro
• Weight:64g without battery
• Motor: GR1103 8000KV
• Propeller: Gemfan 1635
• Item: Thinking P16 HD
• Motor to motor:79mm
• Brand: GEPRC
• Antenna:5.8G
• VTX: Link

AIO

• VTX: 5.8GHz (48 Channel IRC Tramp,PIT/25/100/200mW)
• ESC: 12A * 4 BLHeli_S (Dshot/Multishot/OneShot)
• OSD:BetaFlight OSD w/ AT7456E chip
• Firmware target: GEPRCF411
• Model: GEP-12A-F4 AIO
• MCU: STM32F411
• Gyro:MPU6000

IMPORTANT NOTES

• The DJI Remote Controller is recommended for beginners but NOT required to use the FPV System, since you won't need to set up another receiver. If you don't have the DJI Remote Controller, you will need a receiver for your transmitter. and then bind to your own radio as usual.
• If you do not have the frsky transmitter, please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.
• Our current frsky receivers default version in 2.XX, requires us to use of the same version of frsky transmitter. 

• Battery: 3s 300 HMS 11.4V 30C/60C (65mmx19mmx11mm)

• 1x GEPRC Thinking P16 HD Cinewhoop w/ RunCam Wasp
• 4x GEMFAN 1636 Propellers
• 1x 1.5mm L screwdriver
• 2x Battery strap 15*120
• 1x 5.8G Antenna

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS