The DarwinFPV CineApe25 is DarwinFPV’s first cinematic whoop FPV drone. The frame comprises upper and lower carbon plates and a high-strength injection guard, which is very strong, crash-resistant, and easy to disassemble. The motor adopts a 1504-3600KV long-life motor; DarwinFPV abandoned the traditional AIO solution and adopted the split design of the F4+30A stack to reduce the maintenance cost in the future. The accessories adopt mature and stable solutions to maximize the durability and reliability of the drone. CineApe25 is a very cost-effective whoop FPV drone. It solves beginners' worries about the high-risk factors and high threshold of assembly and improves their after-sales experience. If you are still struggling with which FPV drone to buy, DarwinFPV CineApe25 may be your best choice!

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in bold.)

• Injection-molded propeller guard
• Ducted aerodynamic design
• Quick-release frame design
• Protected components
• 1504 3600KV Motors
• User-friendly design

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

PRE-TUNED AND PRE-SETUP

This RTF is fully built and test-flown by build technicians at our Florida facility.

• Reserved Connector: 1x SBUS(RX1 inverter) 2x Uarts(1,2) 2x Softserial 1x I2C 1x RGB 1x Buzzer 1x USER(A15) 1x USB
• Weights:
  
  • 144g (Without Battery)
  • 238g (With 4S 850mAh Lipo Battery)
  • 250g (With 4S 850mAh Lipo Battery + RunCam THUMB Camera)
  • 311g (With 4S 850mAh Lipo Battery + 4K NANO1 Action Camera)
• Camera and VTX: CADDX Ant + Darwin 600mW
• Hovering Time: 9mins (4S 850mAh Battery)
• Flight Controller: F411 MPU6500 AT7456E
• Model: CineApe 25 Cinematic FPV Drone
• Dimensions: 160mm x 160mm x 43mm
• Recommend Battery: LiPo 4S 850mAh
• Propeller: HQProp T63MMX6
• Frame Structure: True -X
• ESC: BlueJay 3-6S 30A
• Motor: 1504-3600KV
• Wheelbase: 112mm
• Brand: DarwinFPV

IMPORTANT NOTES

• The DJI Remote Controller is recommended for beginners but NOT required to use the FPV System, since you won't need to set up another receiver. If you don't have the DJI Remote Controller, you will need a receiver for your transmitter. and then bind to your own radio as usual.
• If you do not have the frsky transmitter, please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.
• Our current frsky receivers default version in 2.XX, requires us to use of the same version of frsky transmitter. 

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x DarwinFPV CineApe 25 Whoop Drone Analog w/ Caddx Ant (Choose Receiver)
• 1x EVA Bottom Plate Shock-Absorbing Pad
• 4x HQProp T63MMX6 Propeller (2L2R)
• 2x Battery Strap 10x170mm
• 1x EVA Crashproof Foam
• 1x Hardware Kit
• 1x Manual
• 1x Sticker

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS