The GEPRC Crocodile5 Baby LR HD 5" drone is a masterclass in drone design, boasting integration with the Runcam Wasp VTX for superior HD video clarity. As the successor to the acclaimed Crocodile Baby 4-inch model, this 5-inch drone is primed for long-range and freestyle flights, promising speed and unmatched stability.

Note: (Insert any product options here in black text with options in bold.)

Example: "Choose from two KV's: 1800KV (4S) or 2500KV (6S)."

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in bold.)

• Equipped with the Runcam Wasp VTX, ensuring a high-definition video feed.
• It incorporates a High-Efficiency Power System with the GEP 2004 2550kV Motor combined with Gemfan 5130 propellers.
• Users can experience an extended flight duration of up to 27 minutes when using the GEPRC VTC6 18650 4S1P 3000mAh Batteries.
• An innovative 3D Printed GPS Mount is integrated to boost navigational functionalities.
• Locating the drone is simplified with the GEPRC Finder, an in-built audible beeper.
• Reinforced arms of the drone ensure enhanced stability during flight.
• The drone employs the efficient GEP 2004 Motors known for optimal heat dispersion and ample power.
• The latest GEP F722 AIO FC flight controller is incorporated.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

PRE-TUNED AND PRE-SETUP

This RTF is fully built and test-flown by build technicians at our Florida facility.

• Brand: GEPRC
• Model: Crocodile5 Baby LR Analog
• Frame: GEP-CB5
• Motor to Motor: 227mm
• The thickness of the top plate: 2.0mm
• The thickness of the bottom plate: 2.0mm
• The thickness of the arms plate:4.0mm
• AIO: GEP-F722-35A AIO
• MCU: STM32F722
• Gyro: 6-Axis
• OSD: BetaFlight OSD w/ AT7456E chip
• Firmware target: GEPRCF722 AIO
• Power input: 4S LiPo/Lion
• VTX: 600mW VTX
• Camera: Caddx Ratel V2
• Props: Gemfan 5130
• Antenna: Momoda 5.8G Long Version RHCP
• Motors: GR2004 2550KV
• GPS: GEP-M10
• Crocodile5 Baby LRHD Weight: 213.89g
• Receiver: PNP(Without Receiver) / Frsky RXSR/ TBS Nano RX

IMPORTANT NOTES

• The DJI Remote Controller is recommended for beginners but NOT required to use the FPV System, since you won't need to set up another receiver. If you don't have the DJI Remote Controller, you will need a receiver for your transmitter. and then bind to your own radio as usual.
• If you do not have the frsky transmitter, please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.
• Our current frsky receivers default version in 2.XX, requires us to use of the same version of frsky transmitter. 

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x GEPRC Crocodile5 Baby5 LR Analog Quadcopter
• 4x Gemfan 5130 Props(pairs)
• 8x Footpad
• 1x Silicone pad
• 1x L-shaped screwdriver
• 2x Antenna protection tube
• 1x 15*220mm battery strap

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS