The GEPRC team has advanced in the field of long-range FPV with the introduction of the Crocodile75 V3, setting a new standard in performance.

The GEPRC Crocodile75 V3 features a redesigned structure that minimizes fuselage vibrations, resulting in a more stable flight experience. It's equipped with an O3 Air Unit that is augmented with special cooling components. The integration of the battery plug with the fuselage ensures ease of use. Performance-wise, it utilizes the SPAN G50A BLHeli_32 4IN1 ESC and a 2806.5 1350KV motor, ensuring ample power while optimizing energy consumption.

The GEPRC team has meticulously tuned the Crocodile75 V3's overall performance to deliver an optimal flying experience for pilots.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in Bold)

• The design features a revamped appearance with an enhanced fuselage structure, minimizing gyroscope sampling disruptions caused by fuselage vibrations.
• It utilizes the SPEEDX2 2806.5 1350KV motor alongside the HQ7.5×3.7×3, ensuring power and efficiency.
• The ESC has been upgraded to the SPAN G50A BLHeli_32 4IN1.
• Protective side panels have been added to shield the electronic control system from potential sand and dust interference.
• The battery plug's integration with the body offers a streamlined power-on process, achieving functionality and aesthetics.
• The device incorporates the O3 Air Unit, further enhanced with a specialized heatsink, preventing the O3 Air Unit from overheating and recording disruption.
• The extended fuselage of the Crocodile75 V3 accommodates either a Lipo 6S 3300mah-4500mah or a Lion 6S 6000mah battery.
• It is compatible with 7-inch or 7.5-inch propellers.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

•  Frame: GEP-LC75 V3
• Wheelbase: 342mm
• Top plate: 2.5mm
• Bottom plate: 3.0mm
• Arm plate: 6.0mm
• Splint plate: 2.5mm
• FC: SPAN F722-BT-HD V2
• ESC: SPAN G50A BLHeli_32 4IN1
• MCU: STM32F722RET6
• Gyro: ICM 42688-P
• OSD: Betaflight OSD w/AT7456E chip
• VTX: O3 Air Unit
• Camera: O3
• GPS: GEP-M8U
• Antenna: Momoda 5.8G LHCP RP-SMA 120mm x2
• Motor: SPEEDX2 2806.5 1350KV
• Propeller: HQProp7.5×3.7×3
• Weight: 628.5g
• Receiver: PNP (built-in O3 Air Unit receiver）/ TBS NanoRX / GEPRC ELRS 2.4G
• Recommended battery: Lipo 6S 2600mah-4200mah / Lion 6S 6000mah
• Flight time: 12-30 min

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1 x Crocodile75 V3 HD O3
• 4 x HQProp7.5×3.7×3
• 2 x M20*250mm battery straps
• 2 x Battery Silicone Pads
• 1 x Set of screws
• 1 x L-shaped screwdriver (1.5mm)
• 1 x L-shaped screwdriver (2mm)
• 1 x L-shaped screwdriver (3mm)
• 1 x M5 wrench
• 1 x GEPRC Keychain
• 1 x GP Camera Base

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS