The Happymodell Larva-X Micro 2-3S Whoop is a great racing FPV drone! The Larva-X Micro is very powerful, smooth, comes with Smart Audio, Diamond VTX, Runcam Nano 2, and many other cool features and specs that make this whoop a must-have!

Receiver options: Frsky RXSR, DSMX, Crossfire

Note: At this time EMAX cannot provide the Avan Rush propeller; as a result, Happymodel will be sending the LarvaX w/ HQProp T2.5x2.5x3 props or EMAX Avan Rush randomly. 

Features

• New Crazybee F4 PRO V3.0 AIO Flight controller 2-4s Lipo Compatible
• Powerful and smoothly
• Betaflight OSD support, easy to get RSSI, Voltage, current from your goggles
• Camera Angle adjustable
• VTX power switchable 25mw~200mw
• Smart audio ready, change VTX bands, powers, channels via OSD
• Receiver option: Frsky RXSR, DSMX, TBS CRSF
• Diamond VTX Ready
• Compatible both for 2s-3s Lipo/LIHV

Specifications

• Brand Name: Happymodel
• Item Name: Larva X 2-3S 2.5inch Brushless FPV drone
• Wheelbase: 100mm
• Size: 88mm*88mm*45mm(without propellers)
• Weight: 50g(without battery)
• Recommended Battery (Not Included)
• 3S 300mah/350mah 2S 450mah 3S 450mah

Motor

• Mode: EX1103
• KV options: KV7000
• Configu-ration:9N12P
• Stator Diamter:11mm
• Stator Length:3mm
• Shaft Diameter: Φ1.5mm
• Motor Dimension(Dia.*Len):Φ13.5mm*16mm
• Weight(g):3.7g

FC

• (Frsky version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR
• (Flysky version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS
• (No RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX
• MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
• Sensor: MPU-6000(SPI connection)
• Board size: 28.5 * 28.5MM
• Power supply: 2-4S battery input (DC 7-17V)
• Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready
• Frsky version Built-in SPI Frsky receiver with telemetry(D8/D16 switchable)
• Flysky version Built-in SPI Flysky receiver with telemetry(AFHDS/AFHDS2A switchable)
• No RX version need to add external Receiver
• Built-in Betaflight OSD(SPI Control)
• Built-in Current meter Max 70A
• Current meter scale set to 470
• Built-in 5V 1A BEC
• Built-in voltage detection

Onboard 4-in-1 ESC

• MCU upgraded to EFM8BB21
• Power supply: 2-4S LiPo/LiPo HV (7v/17v)
• Current: 10A continuous peak 12A (5 seconds)
• Support BLHeliSuite programmable
• Factory firmware: F_H_40_REV16_5.HEX
• Default protocol: DSHOT600

Diamond_VTX

• Smart audio ready
• Weight: 3g without antenna
• Video Output Size: VGA (640×480)
• Video Output Format: NTSC
• Record video size: 1280×720 @25FPS
• TF Card support: Max.32G
• Interface: JST SH1.0 3pin for Camera
• JST SH1.0 5pin for Connect with F3/F4 Flight controller
• Compress Format: AVI

Runcam NANO 2

• Min. Illumination: [email protected]
• D-WDR: Auto
• Day/Night: Color
• Power: DC 3-5.5V
• Current : 110mA@5V [email protected]
• Housing Material: ABS
• Net Weight: 3.2g
• Dimensions: L14mm*W14mm*H16mm

Video

Includes

• 1 x Larva-X Frame
• 4 x 1103 7000KV
• 4 x 2.5" Props
• 1 x Runcam Nano 2
• 1 x 25mw~200mw switchable with 720p DVR 
• 1 x Propeller Disassemble Tool
• 1 x Screwdriver