The RCX 1306-2 2300KV Micro Outrunner Brushless Motor is specifically designed for micro sized multirotors and aircraft. This is small yet powerful little motor, capable of running off a 2s or 3s battery setup and designed to run 5" props.

Motor Specs

• Model: 1306-2 (also known as 1715-2)
• KV: 2300KV
• Configu Ration: 9N12P
• Weight: Approx. 13g 
• Prop Shaft Diameter: 5mm (best suitable for 5mm prop, no adapter is required)
• Stator Diameter: 13mm
• Stator Length: 6mm
• Shaft Diameter: 2mm
• Motor Dimensions: Φ17.7×15mm
• ldle Current: 0.2A
• Internal Resistance: 62m
• Weight: Approx 12g (included bullet prop mount)
• Cable Length (3 Cables for ESC): Approx 12cm (will change to 15mm in the future)
• Suitable ESC: 10A
• Suitable Battery: 2-3S Li-Po Battery 7.4V - 11.1V (recommend 11.1V 3S Lipo for better performance)

Package Contents

• 1 x RCX 1306-2 2300KV Micro Outrunner Brushless Motor
• 1 x Prop nut
• 1 x Set of Screws

Note: We recommend using some sand paper on the bare motor wire leads to remove a coating on the wire. This makes the wire leads much easier to solder.