The FrSky TD SR18 combines an upgraded ADV Stabilizer function with traditional gyroscope stabilization modes, featuring 5 additional channels and advanced pin mapping for diverse flight modes like Stabilization, Auto-Level, Hover, and Knife-Edge. Configurable output pins, exclusive features like Stab file sharing, programmable parameters, and high-precision telemetry sensors for altitude and vertical speed monitoring provide a significant advantage over regular S series stabilization receivers. Simultaneously, the Tandem (TD) dual-band receivers operate at 900MHz and 2.4GHz frequencies, delivering low-latency signals, extended control range, and superior anti-interference performance. The TD SR18 receiver, with its triple antenna design, ensures wide, multi-directional coverage for remote signals, appealing to RC enthusiasts seeking resilience and long-range capabilities. Additionally, the receiver incorporates a socket for connecting the NFC Switch panel, enabling the built-in Power Switch function through standard XT30 connections, and boasts 18 configurable channels supporting various assignments, enhancing compatibility with telemetry devices for simplified setup in the Tandem series receivers.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in Bold)

• Built-in High-Precision Telemetry Sensor (Altitude, Vertical Speed, etc.)
• Long Control Range (Range varies based on the RF Power settings.)
• Simultaneous Working Dual-Band (900M/2.4G) TD Mode
• Triple Antenna Design (2×2.4G & 1×900M antennas)
• SBUS Out Port (Supports 16CH / 24CH mode)
• SBUS In Port (Supports Signal Redundancy)
• Built-in Advanced Stabilization Functions
• Basic Black-Box Data Record Function
• Dual Power Balancing Consumption
• Dual XT30 Power Input Connector
• Over-The-Air (OTA) FW Update
• 4ms Race Mode with Telemetry
• 18 Configurable Channel Ports
• FBUS / S.Port

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

• Voltage Measurement Range via AIN (External device): 0-35V (Battery Voltage Divider Ratio: 1:10)
• Continuous Current: ≤30A (power the device) | Instantaneous Current: ≤60A (power the device)
• Compatibility: Tandem series radio & TD protocol capable RF module
• Operating Voltage: 4-10V(Recommend 2S Li Batteries)
• Triple Antenna Design (2×2.4G & 1×900M antennas)
• Dual XT30 Power Input Connector
• Dimension: 53*40*16mm (L*W*H)
• Frequency: 900MHz & 2.4GHz
• Operating Current: ≤195mA
• Weight: 29.1g

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

• Manuals

• 1x FrSky TD SR18 2.4GHz 900M Dual-Band Tandem Receiver w/ Antennas

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS