QUICK-CURE™ 5 min. bonds wood, metal, glass, foam, and fiberglass. Strong 3500 PSI, non-brittle bonds.

Specifications

QUICK-CURE™ 5 min. Epoxy is an equal two-part hobby adhesive that forms high strenght bonds through a chemical reaction between the resin and hardener. Ther cured epoxy is resistant to most chemicals.

QUICK-CURE™ is the least temperature sensitive of our epoxies. It will cure in temperatures down to 40℉. Temperatures above 90℉ shorten the working time before the epoxy begins to set up from 5 to less than 4 minutes.

QUICK-CURE™ bonds best to clean, textured surfaces. Smooth, non-porous surfaces should be roughened with coarse sandpaper to improve adhesion. Acetone and Isopropyl rubbing alchohol work as the best solvents for cleaning uncured epoxy from surfaces. QUICK-CURE™ lack of brittleness allows it to form bonds on materials as different as balsa wood and glass; however, it is not recommended for areas subject to long-term immersion in water. Cured QUICK-CURE™ can be coated with polyester resin without affecting the curing of the resin. Full cure in less than 15 minutes.

Includes

• 1x Epoxy
• 1x Hardener