Compact and powerful, the NewBeeDrone Hummingbird V3 Whoop boasts a lightweight design featuring NewBeeDrone Azi Tri-Blade Propellers, a Cockroach65 Brushless Frame, and Hummingbird 0802 Motors (25000KV). With the Hummingbird V3 ELRS AIO Flight Controller at its core, enjoy advanced features like the STM32F411 MCU, BMI270 gyro, and a 25mw VTX with BeeTX 5.8GHz Antenna for seamless control and video transmission. The 65mm drone, weighing 21.85g (PP Material) or 23.33g (PC Material), is equipped with a BeeEye Camera and Goober Canopy v1 for an optimal FPV experience.

Note: Color of drone will be random.

VIDEO: NewBeeDrone Hummingbird F4V3 Tiny Whoop Racer

• Integrated Video Transmission
• Compact and Durable Build
• Advanced Flight Controller
• Versatile Propulsion
• ELRS Technology

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

WHOOP

• Propellers: NewBeeDrone Azi (Tri-Blade) Micro Propellers 31mm - 1.0mm Shaft (Random Color)
• Flight Controller: Hummingbird V3 ELRS AIO Flight Controller
• Frame: Cockroach65 Brushless Frame Random Color
• Total Weight of the Drone without battery:
  
  • 21.85g (PP Material Cockroach65 frame)
  • 23.33g (PC Material Cockroach65 frame)
• Motors: Hummingbird 0802 Motor 25000KV  
• Canopy: Goober Canopy v1 Random Color
• Camera: BeeEye Camera
• Drone Size: 65mm

HUMMINGBIRD V3 ELRS AIO

• MCU: STM32F411
• GYRO: BMI270
• VTX:  25mw with BeeTX 5.8Ghz Antenna
• ESC: 12A BLHeliS pre-flashed with Bluejay 0.19.2 Target: O-H-10 48kHz
• ESC Connector: JST-1.0 3Pin
• OSD: NBD7456 Graphical OSD compatible with Betaflight OSD
• Receiver: 2.4G Antenna with MHF3 connector
• Flight Controller Weight: 4.57g(Include antennas and battery connector) RS 3.23
• Flight Controller Size: Outer dimensions: 29x29x7.6mm
• Flight Controller Holes: 25.5x25.5mm
• Battery input: 1S Only
• Uart1: free
• Uart2: free
• Power Plug: Nectar Connector Gold Plated PH2.0 Solid Pin
• SPI ELRS3.0 receiver (Binding instruction: power on the drone and push the bind button under the flight controller to get into bind mode. If your remote control is not ELRS3.0 or above version. You will need to update your remote controller
• ELRS to 3.0 version because beta flight 4.4 will no longer support any lower version of 3.0)

IMPORTANT NOTES

• This drone has been carefully crafted using only NewBeeDrone parts. It is important to note that using non-compatible components from other brands may result in technical difficulties. Additionally, should you modify the drone, you must assume full responsibility for any resulting issues. It is not advisable to proceed with modifications without the necessary knowledge and expertise. We appreciate your understanding and cooperation in ensuring the safe operation of the drone.
• RESET SETTINGS
  
  • The stock firmware comes with all settings, including PID-tune data. If you change anything and feel it does not perform as well as the original settings, reset it in Betaflight under the Setup tab to bring it back to the factory default.
• BINDING PROCEDURE
  
  • To bind, connect to USB power or a battery source. Push the bind button on the front bottom of the flight controller to trigger the binding mode. Bind it to your radio controller. (Note: The Hummingbird v3 only supports ELRS 3.0 or a later version. If your remote controller is ELRS 2.5, you must update your ELRS TX Module.)

• Nitro Nectar Gold 250 mAh 1S PH2.0 Battery

• NewBeeDrone Github

• 1x NewBeeDrone Hummingbird V3 1.2" 31mm Nano 1S Whoop BNF (Random Color)

VIDEO: FASTEST Whoop I've Flown? - NewBeeDrone Hummingbird V3 - REVIEW & FLIGHTS

VIDEO:NewBeeDrone HummingBird v3 // Back in Time Pricing