iFlight Borg 5S 60R Stack - F4 Flight Controller + 60A 3-8S BL32 4-in-1 ESC - 20x20
$113.49
In Stock
Only left for same day shipping. Order now!
iFlight Borg 5S 60R Stack - F4 Flight Controller + 60A 3-8S BL32 4-in-1 ESC - 20x20
The iFlight Borg 5S 60R Stack is built for serious FPV racers, combining a high-performance Borg 5S RX F4 Flight Controller with the powerful Borg 60R 60A 4-in-1 ESC in a compact 20×20 form factor—perfect for modern 5" racing drones.
About this product
The iFlight Borg 5S 60R Stack is built for serious FPV racers, combining a high-performance Borg 5S RX F4 Flight Controller with the powerful Borg 60R 60A 4-in-1 ESC in a compact 20×20 form factor—perfect for modern 5" racing drones. The FC features a built-in ELRS 2.4GHz receiver with an integrated antenna for a clean setup and reliable signal, plus support for external receivers for added flexibility. With 60A continuous output, BL32 firmware, bidirectional DShot, telemetry, and anti-spark/TVS protection, the ESC delivers consistent, race-ready performance. Built-in high polymer capacitors simplify your build and reduce weight.
Features
- TVS (Transient Voltage Suppressor) Protection
- Bidirectional DShot & Telemetry Support
- 60A Continuous / 65A Burst Current
- Compact 20×20 Mounting Pattern
- Built-In High Polymer Capacitors
- Built-In ELRS 2.4GHz Receiver
- Integrated Anti-Spark Circuit
- External Receiver Support
- All-in-One Stack
- BL32 Firmware
Specifications
FLIGHT CONTROLLER
- VTX Protocol: Supports DJI MSP, SmartAudio, IRC Tramp, and HDZero
- Firmware Target: IFLIGHT_BLITZ_ATF435 (Betaflight)
- Input Voltage: 4–8S; supports LiHV batteries
- BEC: 5V 2.5A, 12V 2A (12V with VTX switch)
- Mount Pattern: 20×20mm / Φ4mm
- Dimensions: 34×28.5mm ±1mm
- Flash: 16MB (Blackbox flash)
- I2C Serial: Not supported
- MCU: AT32F435RGT7
- OSD Chip: AT7456E
- LED Controller: Yes
- Motor Outputs: 4
- Weight: 6.8g ±1g
- Beeper Pad: Yes
- Gyro: ICM42688
- Barometer: N/A
- UARTs: 4
ESC
- Protocol: Supports DShot150/300/600, MultiShot, OneShot, etc
- Input Voltage: 3–8S; supports LiHV batteries
- Firmware Target: IFLIGHT_BLITZ_G3 32.9
- Mounting Holes: 20×20mm / Φ4mm
- Bidirectional DShot: Supported
- Dimensions: 45×52mm ±1mm
- Max Continuous Current: 60A
- Max Burst Current: 65A (10s)
- Firmware: BL32 (32-bit ESC)
- Telemetry: Supported
- MCU: STM32G071N
- Current Sensor: No
- Weight: 14.5g ±1g
- Driver: FD6288
- BEC: No
Includes
- 1x iFlight 60R 60A 3-8S BL32 4-in-1 ESC - 20x20
- 1x iFlight Borg 5S F4 Flight Controller - 20x20
- 1x Hardware Kit
- 1x Cable Set
More Information
| SKU | 23086 |
|---|---|
| UPC (GTIN) | 723326372896 |
| Manufacturer | iFlight |
| Country of Manufacture | China |
| NDAA Compliant | No |
| Mounting Pattern | 20x20mm |
| Amps | 60 Amps |
| Flight Controller Processor | F4 |
| Voltage | 3-8 Cell (10v-35v) |
| ESC Firmware | BLHeli_32 |
| Number of ESC's | 4 ESC's in 1 |