iFlight BLITZ F7 V1.1 AIO Board - F745 FC + 55A 2-6S Bluejay ESC - 25x25
iFlight BLITZ F7 V1.1 AIO Board - F745 FC + 55A 2-6S Bluejay ESC - 25x25
In Stock
About this product
Introducing the iFlight BLITZ series AIO FCs for your ultimate build. A future-proof all-in-one FC to step up the game and make some more room for future flight firmware development like Betaflight, Emuflight, etc. Lightweight, minimum size, minimum work. This could only be achieved by using BGA chipsets instead of ordinary QFP (big size) MCUs and ultra-powerful Mosfets for almost any build. Solder your motor wires on and let's go!
Note: As of December 26, 2023:The gyro was changed from BMI270 to ICM42688.
VIDEO: (Insert Video Title here in Bold)
Features
- Integrated Connectors for DJI O3 and Caddx Vista/Polar
- High-performance Gyro (ICM42688)
- Blackbox Logging (16MB Flash)
- Powerful MCU (STM32F745)
- Separation of FC and ESC
- Onboard OSD (AT7456E)
- Modular Design
USE BULLETED FEATURE HERE IN BOLD CAPS.
Add additional feature descriptions here to describe the above.
USE BULLETED FEATURE HERE IN BOLD CAPS.
Add additional feature descriptions here to describe the above.
Specifications
ESC
- Supports: DShot, DShot150/300/600, MultiShot, OneShot, etc
- Bidirectional DShot: Yes (needs to use Bluejay firmware)
- Output Current: 55A, peak value 65A (10 seconds)
- ESC Firmware: Q-H-40 - Bluejay, 0.16, 24kHz
- Input Voltage: 2-6S, supports LIHV battery
- Current Sensor: Ratio 200 (1/10mV/A)
- ESC Telemetry: No
- ESC MCU: BB21
- Driver: FD6288
- BEC: No
FLIGHT CONTROLLER
- Protocol Supports: SmartAudio / IRC Tramp VTX
- Mounting Pattern: 25.5mm x 25.5mm, φ3mm
- Input Voltage: 2-6S, supports LIHV battery
- FC Firmware: iFlight BLITZ F7 AIO
- Blackbox: 16MB Onboard Flash
- Dimensions: 35mm x 35mm
- OSD: iFlight OSD (AT745E)
- MCU: BGA-STM32F745
- WS2812 LED Strip: Yes
- Connector: Micro-USB
- BEC Output: 5V 2.5A
- Barometer: DPS310
- Gyro: ICM42688
- BEC: 5V 2A / 3A
- Weight: 10.5g
- Buzzer: Yes
IMPORTANT NOTES
- Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."
Recommended (Not Included)
- (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")
Links
- (Insert links such as manuals, firmware, etc)
Includes
- 10x 0.8mm Black Heat Shrink Tubes, 10mm
- 1x XT30U Male 18AWG Cable, 70mm
- 1x iFlight BLITZ F7 V1.1 AIO Board
- 1x 1.0-7P Cable, 50mm-28mm
- 2x Capacitors, 470uF/35V
- 1x 1.0-7P Cable, 50mm
- 1x Hardware Set
Featured Videos
ADD VIDEO TITLE HERE IN BOLD CAPS
ADD VIDEO TITLE HERE IN BOLD CAPS
iFlight Support
More Information
| SKU | 22249 |
|---|---|
| UPC (GTIN) | 724376362158 |
| Manufacturer | iFlight |
| NDAA Compliant | No |
| Mounting Pattern | 25.5x25.5mm |
| Item Returns | This item can be returned |