The Diatone Mamba MK4 is an F722 flight controller. With WiFi capabilities through the SpeedyBee APP, this stack is the perfect addition to your FPV build. This version has an MPU6000 Gyro.

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: Diatone Mamba H743 MK4 FC & 128K ESC Unboxing

• 30.5 x 30.5mm Mounting Pattern
• 16M Flash Memory Blackbox
• 3~6S Lipo (12.6~25.2V) Input
• WiFI SpeedyBee Capabilities
• MPU6000 Gyro
• 6 Uarts
• Buzzer
• OSD

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

• Receiver: TBS / SBUS / IBUS / DSM
• GYRO: Version A: MPU6000
• Mounting: 30.5x30.5mm
• Blackbox: 16M Memory
• WIFI: SpeedyBee APP
• Size: 38.0x40.5x8mm
• BEC Protection: Yes
• TVS Protection: Yes
• Frequency: 216MHz
• Software: Betaflight
• AIR UNIT Port: Yes
• MCU: STM32F722
• Barometer: SPL06
• VTX SWITCH: Yes
• ESC Signal: 8 Set
• Buzzer Pad: Yes
• OSD: AT 7456E
• CURR Pad: Yes
• BEC 3.3V: 0.5A
• Input: 6S LiPo
• MB LED: Yes
• BF LED: Yes
• Weight: 10g
• BEC 5V: 3A
• BEC 9V: 3A
• RSSI Pad: /
• F.Port: Yes
• 12C: Yes

IMPORTANT NOTES

• If you don't see your FC in the connection list, please wait for the official Speedybee update.
• If you are connected to WIFI and are prompted with "Connecting" or "MSP not responding", please check the settings in "Ports-UART4".Keep the Speedybee APP in the latest version, restart the device and the Speedybee APP.

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

• MPU6000: MAMBAF722_2022A

• 1x Diatone MambaMK4 F722 APP FC
• 1x 8-Pin Single-Ended Cable for FC
• 5x M3 ESC Isolation Dampers
• 5x M3 Silicone Dampers
• 1x 6-Pin Air Unit Cable
• 2x 8-Pin Cable

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS