The Diatone Mamba Stack - MK4 F722 APP FC + 65A 3-6S BHeli_32 128K ESC (MPU6000) features an MK4 APP F722 Flight Controller and 55A 128K ESC. Featuring an OSD, MPU6000 Gyro, and 128 Memory Blackbox, this stack is the perfect addition to your FPV build.
 

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: Diatone Mamba H743 MK4 FC & 128K ESC Unboxing

• Synchronous rectifying BEC
• Large soldering pads
• Type-C interface
• BMI270 Gyro
• Easy to use 

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

DIATONE MK4 STACK

• Protocol: Dshot 300/600/1200
• Target: MAMBA F65_128K
• Mounting: 30.5x30.5
• Output Current: 65A 
• Size: 44.5x40.0x7.5
• Peak Current: 75A
• BLHeli: BLHeli_32
• Input: 3-6S Lipo
• PWM: 24-128K
• Telemetry: Yes
• Weight: 15G
• Curr: Yes

MK4 F722 APP FC

• Target: BMI270: MAMBA, F722_2022A, ICM42688P: MAMBA, F722_2022B
• GYRO: Version A: BMI1270, Version B: ICM42688P
• Receiver: TBS / SBUS / IBUS / DSM
• Mounting: 30.5x30.5mm
• Blackbox: 16M Memory
• WIFI: SpeedyBee APP
• Size: 38.0x40.5x8mm
• BEC Protection: Yes
• TVS Protection: Yes
• Frequency: 216MHz
• Software: Betaflight
• AIR UNIT Port: Yes
• MCU: STM32F722
• Barometer: SPL06
• VTX SWITCH: Yes
• ESC Signal: 8 Set
• Buzzer Pad: Yes
• OSD: AT 7456E
• CURR Pad: Yes
• BEC 3.3V: 0.5A
• Input: 6S LiPo
• MB LED: Yes
• BF LED: Yes
• Weight: 10g
• BEC 5V: 3A
• BEC 9V: 3A
• RSSI Pad: /
• F.Port: Yes
• 12C: Yes

65A 6S ESC (MPU6000)

• GYRO: Version A: BMI1270, Version B: ICM42688P
• Receiver: TBS / SBUS / IBUS / DSM
• Mounting: 30.5x 30.5mm/M3
• Receiver Protection: Yes
• Blackbox: 16M Memory
• WIFI: SpeedyBee APP
• Size: 38.0x40.5x8mm
• BEC Protection: Yes
• TVS Protection: Yes
• Frequency: 216MHz
• Software: Betaflight
• AIR UNIT Port: Yes
• MCU: STM32F722
• ESC Signal: 8 Set
• VTX Switch: Yes
• Buzzer Pad: Yes
• CURR Pad: Yes
• OSD: AT 7456E
• Input: 6S Lipo
• UARTs: 6 Set
• MB LED: Yes
• BF LED: Yes
• Weight: 10g
• BEC 5V: 3A
• BEC 9V: 3A
• F.Port: Yes
• BEC 3.3V
• 12C: Yes

IMPORTANT NOTES

• If you don't see your FC in the connection list, please wait for the official Speedybee update.
• If you are connected to WIFI and are prompted with "Connecting" or "MSP not responding", please check the settings in "Ports-UART4".Keep the Speedybee APP in the latest version, restart the device and the Speedybee APP.

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

• ICM42688P: MAMBAF722_2022B
• MPU6000: MAMBAF722_2022A
• BMI270: MAMBAF722_2022A
• MOBILE WIFI REFERENCE 

• 1x Diatone Mamba Stack - MK4 F722 APP FC + 65A 3-6S BHeli_32 128K ESC
• 5x M3 ESC Isolation Dampers
• 5x M3 Silicone Dampers
• 1x 6-Pin Air Unit Cable
• 2x 8-Pin Cable

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS