The BETAFPV Pavo20 Pocket, lightweight at only 95g, is designed to meet the needs of DJI aerial photographers who are entering the world of FPV. This package comes with essential components and features a pocket-sized design for convenient portability. The Auxiliary Flight Function with N/S/M and Turtle Mode is perfect for the beginners' initial exploration. Designed to carry a DJI O3 system (not included); it shares the same frame structure and vibration solution as the Pavo20, ensuring flight stability and reliability. Say goodbye to jelly and hello to professional-grade, cinematic results. With 2S power, enjoy flight times of up to 4.5 minutes. Grab your Pocket and be ready to capture every funny moment on the go. It's time to fully unleash beginners' cinewhoop creativity.

Choose a Receiver:

• ExpressLRS 2.4GHz
• TBS Crossfire

Note: This quad is VTX Ready only - the FPV system is NOT included, but it does support DJI O3 Air Unit.

VIDEO: Aggressive Micro CineWhoop // BetaFPV Pavo20 // 3s Power

• Auxiliary Flight Function with hover capabilities
• Integrated HD VTX Mounting Bracket
• Rubber Damper Vibration Design
• Independent Flight Controller
• Powerful Propulsion System
• Various Flight Modes
• Modular Protection

POWERFUL PROPULSION SYSTEM

Experience the ultimate power and speed with a customized 1103 | 11000KV Motor and durable GF 2023 3-blade Props. It offers an optimal Thrust-to-Weight Ratio for agile and precise maneuvers. The higher-capacity BT3.0 550mAh 2S Battery provides flight times of up to 4.5 min, ensuring exceptional smooth aerial footage. 

AUXILIARY FLIGHT FUNCTION

The Auxiliary Flight Function enables a stable hover at a desired altitude, and position minimizes drifting and wobbling, providing stable flight for an enjoyable and safe experience. The Pocket offers N/S/M 3 flight modes, no burden to fly away. By engaging in Turtle Mode, the drone can flip over automatically after the crash to resume flying.

• Fixed Point Sensor: Optical Flowmeter & Laser & Barometer
  • Horizontal accuracy: ±0.2m,
  • Vertical positioning accuracy: ±0.3m   
• Support VTX (not included): DJI O3 Air Unit
• Recommend Battery: BT3.0 2S 550mAh
• Supports Camera (not included): DJI O3
• Motor: 1103|11000KV Brushless Motor
• Flight Time (8.4V~6.8V):  4.5min
• Props: GF 2023 2-Blade Props
• FC: Independent R & D FC
• Battery Connector: BT3.0
• Battery Slot: 16.2x14mm
• Quadcopter Color: Black
• RX Version: ELRS, TBS
• Flight Range: 500m
• Empty Weight: 95g
• Wheelbase: 90mm

IMPORTANT NOTES

• Pavo20 Pocket currently does NOT SUPPORT control with DJI's original remote controller.
• Pavo20 Pocket requires the installation of the DJI O3 HD Digital VTX to fly properly.
• The M Mode of the first batch Pavo20 Pocket is temporally not activated for use.
  
• The actual flight time depends on the flight environment and the flight mode.

O3 INSTALLATION and ADJUSTMENT

• Camera angle adjustment: secure the camera housing and adjust the camera angle by loosening or tightening the screws on both sides
  
• Install BT3.0 550mAh 2S Battery with BETAFPV logo OUTWARD for proper quadcopter power connection

• Firmware and CLI Dump
• User Manual

• 1x BETAFPV Pavo20 Pocket Cinewhoop - No FPV System
• 1x 2S Battery Charger and Voltage Tester | BT3.0
• 4x Gemfan 2023 3-blade Propellers(1.5mm Shaft)
• 1x DJI O3 HD Digital VTX Mounting Bracket
• 4x Gemfan 2023 2-Blade Propeller
• 1x USB Type-C Adapter Board
• 2x BT3.0 550mAh 2S Battery
• 1x Pavo20 Pocket Manual
• 1x Portable Storage Bag 
• 1x 4-Pin Adapter Cable
• 1x Hardware Set