APD F-Series 80F3[X] V2 80A 8S ESC
APD F-Series 80F3[X] V2 80A 8S ESC
About this product
=The APD F-Series 80F3[X] V2 80A 8S ESC is an upgrade to the trusted ARM architecture. APD has included highly requested features such as configuration options, Bi-Directional DShot, and UART overvoltage protection. You can easily swap your existing 80F3[X] units for the 80F3[X]v2 ESCs. Additionally, their ESCs continue to offer features such as PWM-frequency dithering and Active Phase-Current Demagnetisation, which enable smooth control with various powertrain combinations and peak power outputs of up to 4.7 kW.
Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)
VIDEO: (Insert Video Title here in Bold)
Features
- Designed and manufactured in Australia using only the highest quality components, ensuring no sacrifice in reliability. (V2)
- HBM (Hectic Boost Mode) ensures this will deliver maximum thrust, outperforming any other ESC
- Configuration of drive parameters, signal types and fault handling (V2)
- High-speed telemetry rates when operating DShot and ProShot (V2)
- Dynamic signal quality checks across supported input protocols (V2)
- Additional Telemetry types: PWM Telemetry and RPM Output (V2)
- Reversible operation support (full forwards to full reverse) (V2)
- Virtually no setup time, with simple motor reverse solder tab
- Digital commands over Proshot (including anti-turtle mode)
- Passthrough firmware updating and configuration (V2)
- Hardware protection for UART programming pins (V2)
- Bi-Directional DShot for RPM Filtering support (V2)
- Auto-detect ProShot or Dshot any frequency range
- 8-Layer PCB to ensure minimal track resistance
- Dshot300 to Dshot1200 capable (0.3-1.2Mbs/s)
- ProShot1000 capable (1Mbs/s)
- Up to 80 A Continuous* current
- Digital commands over Dshot
- Intelligent current sensing
- Onboard bootloader (V2)
- Plug and play firmware
- Auto Timing Advance
- Up to 750,000 eRPM
- True 10bit resolution
- 140 A Burst current
- Up to 8S capable
- Telemetry output
- Auto PWM-freq
- LED indication
USE BULLETED FEATURE HERE IN BOLD CAPS.
Add additional feature descriptions here to describe the above.
USE BULLETED FEATURE HERE IN BOLD CAPS.
Add additional feature descriptions here to describe the above.
Specifications
- Additional Telemetry types: PWM Telemetry and RPM Output (V2)
- Dshot: Dshot300 to Dshot1200 capable (0.3-1.2Mbs/s)
- ProShot1000 capable: 1Mbs/s
- Continuous current: Up to 80 A
- Battery capability: Up to 8S
- Firmware: Plug and play
- eRPM: 750,000 eRPM
- Resolution: True 10bit
- Burst current: 140A
- PWM-freq: Auto
IMPORTANT NOTES
- Continuous current ratings are at a 100% throttle duty cycle. Continuous rating is defined as max sustained current at 100% throttle for 60 seconds with 33 m/s airflow.
Recommended (Not Included)
- (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")
Includes
1x APD F-Series 80F3[X] V2 80A 8S ESC
Featured Videos
ADD VIDEO TITLE HERE IN BOLD CAPS
ADD VIDEO TITLE HERE IN BOLD CAPS
More Information
SKU | 20549 |
---|---|
UPC (GTIN) | 746935946975 |
Manufacturer | Advanced Power Drives |
NDAA Compliant | No |
Mounting Pattern | N/A |
Item Returns | This item can be returned |