SkyStars Star-Lord 228 5" ARF Drone Kit - 6S

SkyStars Star-Lord 228 5" ARF Drone Kit - 6S

Back Ordered

Only left for same day shipping. Order now!
SkyStars Star-Lord 228 5" ARF Drone Kit - 6S
SkyStars Star-Lord 228 5" 6S ARF Drone Kit features a 5" frame, HD stack, motors, and everything you need to start building your very own FPV quadcopter!

About this product

The SkyStars Star-Lord 228 5" 6S ARF Drone Kit features a 5" frame, HD stack, motors, and everything you need to start building your very own FPV quadcopter!

An amazing deal for a full drone ARF (almost-ready-to-fly) Kit. You will have to build it yourself, but that is half the fun!

You will need to use your own Rx and bind to the radio of your choice.

Note: Receiver, battery, goggles, and radio controller NOT included in this kit.

Features

  • Gemfan Hurricane Propellers
  • SkyStars KOKO 6S Motors
  • F7 Flight Controller
  • 1200TVL Camera
  • RGB LEDs
  • Lipo Straps
  • 5" Frame
  • 55A ESC

Specifications

SkyStars Star-Lord 228mm Frame Kit

  • The thickness of the bottom plate: about 2.5mm
  • The thickness of the top plate: about 2mm
  • Item name: Star-lord 228mm frame Kit
  • Arm Plate Thickness: about 6mm
  • Screws: YFS 12.9 class screw
  • Side Plate Thickness: 2mm
  • Material: 3K Carbon fiber
  • Wheelbase: 228mm
  • Weight: 118g

SkyStars KM55 55A 4-in-1 ESC

  • Input voltage: 3-6S LiPo
  • Con.Current: 55A
  • Peak Current: 70A≥ 10S
  • Firmware: BLHeli_32
  • Support: Dshot 600/1200
  • Mounting hole : 20X20 mm/M3
  • BEC: No
  • Product size: 35*47*6.5mm
  • Weight: 16.5g

SkyStars F7 3-6S 20x20 HD Flight Controller

  • Mounting Holes: Standard 20mm/M3 square to the center of holes
  • OSD: Betaflight OSD & DJI HD OSD (UART6)
  • 6 hardware UARTS (UART1,2,3,4,5,6)
  • MCU: STM32F722RGT6 216MHz
  • Firmware: SKYSTARS F7HD
  • Dimensions: 35x28x7mm
  • Input Voltage: 3-6S Lipo
  • IMU: MPU6000 (SPI)
  • Buzzer Pad: YES
  • Barometer: YES
  • Blackbox: 16MB
  • 5V 2A & 10V 2A
  • Supports DJI
  • Weight: 4.2g

SkyStars KOKO 2207 1950KV 6S Motor

  • Lead Specification: 20#AWG 120mm
  • Weight (Excluding Thread): 32.2g
  • No Load Current (10V) : 1.3A
  • Rated Voltage (Lipo) : 4S-6S
  • Upper Current Limit: 42.3A
  • Size:φ27.5*19.5*32.7mm
  • Power Upper Limit: 980W
  • Axle Diameter: 5 mm
  • Slot Pole: 12N14P
  • Resistance: 52 mΩ

Gemfan Hurricane 51433-3 Props

  • Max. Blade Width 15.43mm
  • Blade Diameter 129.3mm
  • Material: Polycarbonate
  • Hub Thickness: 7mm
  • Shaft Hole: 5mm
  • Diameter: 5.1"
  • Weight: 3.8g
  • Pitch: 4.33
  • Blades: 3

Cyclone 5804 Pro VTX

  • Power: 25/200/400 / 600mW
  • Number of channels: 40
  • Protocol: Smart Audio
  • Input voltage: 7-24V
  • Connector: MMCX
  • Size: 36x36x5mm

Includes

  • 1x SkyStars Star-Lord 228 V2 Frame (Carbon Fiber)
  • 4x Gemfan 51499R Props (Color may vary)
  • 1x 3D Printed Parts Set (Red)
  • 1x KM55A 3-6S 4-in-1 ESC
  • 4x 2207 1950KV 6S Motor
  • 1x RHCP 5.8GHz Antenna
  • 1x Skystars Sticker Sheet
  • 1x Cyclone 5804 Pro VTX
  • 1x 1200TVL Cam
  • 2x Battery Straps
  • 1x Sky F722 FC
  • 1x Battery Pad
  • 4x RGB LED

More Information

SKU 15395
UPC (GTIN) 789862858485
Manufacturer SkyStars
Item Returns This item can be returned

Also Purchased

Lumenier Double AXII 2 Long Range Right-Angle 5.8GHz Antenna (LHCP)
$29.99
Caddx Nebula Pro Vista Kit 720p/120fps Low Latency HD Digital FPV System
As low as $165.00
Select Options
Caddx Micro Ratel V2 1200TVL FPV Camera - Lumenier Edition (White)
$30.99
Out of Stock
Out of Stock
Fat Shark Attitude V6 FPV Goggles
$349.99
Out of Stock
Out of Stock