Welcome to GetFPV My Account My Wishlist Log In

MQC FUSION V.2 5" Frame Kit

More Views

MQC FUSION V.2 5" Frame Kit
The MQC FUSION V.2 5" Frame by MiniQuadClub was designed for simple maintenance and durability!
Out of Stock

The MQC FUSION V.2  5" Frame by MiniQuadClub was designed for simple maintenance and durability! There is an elegance in simplicity that can only be found when form and function come together in a FUSION of the new and the old. It is where camera angles are high, and part counts are low. It is where maintenance can be completed as comfortably on the park bench, as on the workbench. It is where you can spend more time thinking about how you’ll celebrate hitting that next gap, and less time worrying about how much it will cost if you don’t.


  • Increased arm thickness to 5mm and slightly reduced their width for modern ESC's.
  • Arms are slightly longer to allow for 5.1” props, as well as to increase the clearance between props and battery straps/standoffs.
  • Press-nuts have replaced the 3d printed locknut mount for ease of assembly.
  • The arms now have a through-hole for the flight controller stack to allow for arm changes without having to loosen the stack mounting.
  • Cutouts were added to the camera side plates to allow 3d print designers more space between the standoffs for accessory mounting.
  • A re-designed, slimmer top plate will allow you to access your FC stack screws without removing the top plate, as well as help preserve your battery straps.
  • Notched camera angle holes on the side plate so you can be confident in your cam angle.
  • Slots in the frame allow for 20×20 mounting.
  • Shorter standoffs for modern stacks – the height is now 25mm vs 30mm. Please note that it requires the use of mini or micro FPV cams. If you want a Fusion that still supports the full-size cams, both the Fusion Split v.2 and the Fusion XR are available.
  • Upgrade from stainless steel hardware to 12.9 class hardware.


  • Material: 3K twill matte carbon fiber with Limited Lifetime Warranty*
  • Prop Support: 5”
  • Dry Weight: 138g
  • Standoff Height: 25mm
  • FPV Cam Support: Mini or micro only


  • 1 x MQC 5" Fusion V2 Frame Kit 
  • 1 x Metal bolts and nuts with aluminum standoffs
  • 1 x top plate
  • 1 x Bottom Plate
  • 4 x Arms
  • 2 x FPV cam plates
  • 1 x MQC Lipo straps / MQC Decal / MQC Lipo Pad
Additional Information
SKU 11982
Manufacturer MiniQuadClub
UPC (GTIN) 032733839695
Static Block No