The Happymodel Crux35 V2 Aanalog is an ultra-lightweight 3.5" drone by Happymodel is an excellent micro racing drone that comes with the CrazyF411 flight controller, EX1404 brushless motors, and the Caddx Ant camera to give you a great flying experience! The HQPROP 3.5-inch three-blade propellers ensure the most significant thrust-to-weight ratio.

Receiver options: Integrated SPI ELRS or SPI FrSky D8/D16

Note: SPI FrSky version comes with Betaflight 3.5.7 firmware in order to get a better RSSI range. Bind code is “Frsky_bind” in the CLI Command. 

VIDEO: Long Flight time Rippin // Crux35 // Super Agile!!

Features

• Integrated ExpressLRS SPI receiver or Frsky SPI D8/D16 receiver
• Ultra-lightweight 3.5-inch BNF FPV Freestyle Drone
• Can be equipped with Naked Gopro or SMO4K
• High-efficiency EX1404 power system
• Analog video transmission
• Supports 3-4S battery

Specifications

• Receiver option: SPI ExpressLRS 2.4GHz or SPI Frsky D8/D16 (S-FHSS compatible)
• Size: 130mmx130mmx45mm (without propellers)
• Camera option: Caddx Ant
• Flying time: 9min~15min 4s 750mah battery
• Weight: Crux35 Analog 87 gram
• Product name: Crux35 Analog V2
• Wheelbase: 150mm
• Brand: Happymodel

CADDX ANT CAMERA

• Image Sensor: 1/3" CMOS Sensor
• Horizontal Resolution: 1200 TVL
• TV System: NTSC and PAL(switchable)
• MENU: Support
• IMAGE: 4:3 or 16:
• Synchronization: Internal
• Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
• S/N Ratio: >52dB (AGC OFF)
• Video Output: CVBS
• Lens: 1.8mm/F2.5
• Minimum illumination: 0.001Lux
• Auto Gain Control: YES
• BLC: YES
• WDR: Global WDR
• DNR: 3D DNR
• Dimensions: 14x14mm
• Wide Power Input: DC 3.7-18V
• Work Temperature: -20°C~+60C
• Work Humidity: 20%~80%
• Weight: 1.7g

CrazyF411 FC

• Input Voltage: 2-4S LiPo
• MCU: STM32F411CEU6
• Gyro: BMI270 or ICM42688P
• OSD: Yes
• UARTs: 2 Sets (UART2 was used for ExpressLRS Receiver)
• ESC Connections: Yes
• Firmware: CrazybeeF4DX
• ·BEC: 5V 1.5A
• Current Sensor: Yes
• Buzzer: Yes
• Barometer: No
• Black Box: No
• DJI Compatible: Yes
• Stack Size: 25x25
• Dimensions: 32x32mm
• Weight: 5g

HappyModel Crazyf411 built-in Frsky receiver and 20A AIO FC(Frsky receiver version)

• Input Voltage: 2-4S LiPo
• MCU: STM32F411CEU6
• Gyro: BMI270 or ICM42688P
• OSD: Yes
• UARTs: 2 Sets
• ESC Connections: Yes
• Firmware: MATEKF411RX
• BEC: 5V 1.5A
• Current Sensor: Yes
• Buzzer: Yes

OVX303 OR OVX306 5.8GHz ANALOG VTX

• Input Voltage: 5V
  RF Output Power: 25-300mW
  Antenna Connector: U.Fl
  Power/Video Connection: Solder Pads
  OVX303 Stack Size: 16x16mm, 20x20mm, 25x25mm
  OVX306 Stack Size: 25x25mm
  Weight: 0.9~1

ONBOARD ESC

• MCU upgraded to EFM8BB21
• Power supply: 2-4S LiPo/LiPo HV (7v/17v)
• Currents: 20A continuous peak 25A (5 seconds)
• Support BLHeliSuite and ESC-Configurator programmable
• Factory firmware: Bluejay 0.18.1
• Firmware target: F_H_40_48_v0.18.
• Support DSHOT150/DSHOT300/DSHOT60

PROPELLERS

• Propeller Diameter: 3.5 inch
• Material: Poly Carbonate
• Hub Diameter: 10mm
• Hub Thickness:4.7mm
• Shaft:1.9/1.5/1.9mm
• Adaptor Rings: NO
• Weight: 1.5g
• Blades : 3
• Pitch: 2

MOTORS

• Kv: 3500Kv
• Input Voltage: 3-4S LiPo
• Configuration: 9N12P
• Motor Dimensions: Φ17.8mm x 17.6mm
• Stator Dimensions: Φ14mm x 4mm
• Shaft Diameter: 1.5mm
• Mounting Pattern: Φ9mm
  Weight: 8.7

Recommended (Not Included)

• Battery: 4S 750mAh or maximum 4S 1100mAh

Includes

• 1X Happymodel Crux35 V2 4S Analog Freestyle Racing Drone w/ Caddx Ant Camera ( ELRS or FrSky Options)