GEPRC SMART 16 1.6" Nano Freestyle Drone Analog w/ Caddx Ant
GEPRC SMART 16 1.6" Nano Freestyle Drone Analog w/ Caddx Ant
Select options for stock status
About this product
Introducing... the GEPRC SMART 16 Analog Freestyle! The brand new 1.6-inch mini Freestyle Quadcopter is a tiny, lightweight freestyle FPV addition to the GEPRC Phantom series.
The SMART 16 continues the consistent lightweight design concept of the Phantom series. The 1.5mm carbon fiber arm, with a 1mm top plate, allows it to be lightweight and tough at the same time. GEPRC used high-potential 11000Kv 0803 brushless motors paired with 1610 props, so you can easily freestyle in your favorite field or bando. This drone comes with a 3D printed battery holder and can be powered by a 2S 380mAh battery, which consists of two 1S batteries in series, making it weigh as little as 53.0g, and providing you with 4 minutes of flight time.
Note: Batteries not included.
VIDEO: Nano Size FPV Freestyle Drone - GEPRC Smart 16 - Full Review
Features
- Independent battery compartment design can be stacked on top or bottom, making it easy and convenient to switch batteries.
- The latest 0803 motors are matched with 1610-2 propellers proving maximum power and efficiency
- Includes a full set of high-quality 3D printed parts for a superior flying experience
- Equipped with 200mW 5.8G VTX, with 6 frequency bands and 8 frequency point selection
- Caddx Ant camera with a high-quality image. Clear and clean!
- Uses two 1S batteries in series for greater power output
- Suitable for both freestyle and racing
- 1.6-inch tiny size + Lightweight 36g
Specifications
- Receiver version: PNP, ExpressLRS 2.4G, or TBS Crossfire Nano RX
- ESC: STABLE F411 BLheli_S 4IN1 12A ESC(16*16mm)
- VTX: STABLE F411 VTX 5.8G 200mW(16*16mm)
- OSD: BetaFlight OSD w/AT7456E chip
- Antenna: UFL 5.8G stick VTX antenna
- FC: STABLE F411 FC (16*16mm)
- Bottom plate thickness: 1.5mm
- Top plate thickness: 1.0mm
- Motors: GR0803-11000KV
- Propeller: GemFan 1610-2
- Wheelbase size: 78mm
- Arm thickness: 1.5mm
- IMU: MPU6000(SPI)
- Camera: Caddx Ant
- Frame: GEP-ST16
- MCU: STM32F411
- Model: SMART16
- Weight: 36.0g
Recommended
- 380mAh 2S 90c XT30
Includes
- 1x GEPRC SMART 16 Analog 1.6" Nano Freestyle Drone w/ Caddx Ant (Receiver Optional)
- 1x GemFan 1610-2 propellers (Set of 4)
- 1x M12x120mm LiPo strap
- 1x 3D Printed Part Set
- 1x Hardware Set
- 1x Screwdriver
- 1x Battery Pad
More Information
SKU | 17889 |
---|---|
Manufacturer | GEPRC |
NDAA Compliant | No |
Item Returns | This item can be returned |