BETAFPV Pavo20 Pro 2.2" Cinewhoop - No FPV System

The Pavo20 Pro is an ideal choice for a 2.2'' DJI O3 Cinewhoop under 150g, designed for freestyle shooting. It features LAVA Series 1104 | 7200KV Brushless Motors for maximum thrust and 2.2" Freestyle GF 2218 3-Blade Props co-developed with Gemfan. The aerodynamic frame provides an 8-11% thrust boost, while the LAVA 3S 550mAh 75C Battery extends flight time to 6 minutes and 40 seconds. With two fixed camera holes for wide-angle shooting and the Pavo Series Classic Rubber Damper Design, this setup offers creative space for capturing imaginative aerial feats and enhances your freestyle experience.

Choose a Receiver:

• ExpressLRS 2.4GHz
• TBS Crossfire

Note: This cinewhoop is VTX Ready only - the FPV system is NOT included, but it does support DJI O3 Air Unit, Caddx Vista Kit/RUNCAM Link, or Analog cameras.

VIDEO: Aggressive Micro CineWhoop // BetaFPV Pavo20 // 3s Power

• Classic Rubber Damper Design
• Aerodynamic Frame Design
• High-Performance Motors
• Co-Developed Propellers
• Versatile Camera Setup
• Optimized for DJI O3
• Extended Flight Time

CAMERA & VTX SYSTEM

The Pavo20 Pro supports various HD VTX options. The DJI O3 Air Unit offers up to 1080P resolution with dual-band transmission for improved signal stability. The Caddx Vista supports up to 720P with low latency and excellent image quality. The RunCam Link is compatible with popular FPV systems, providing versatile solutions for pilots. Its customized HD VTX mounting bracket features a split design for easy installation, allowing pilots to explore more possibilities while maintaining HD image quality.

POWERFUL PROPULSION SYSTEM

The Pavo20 Pro features a propulsion system designed specifically for freestyle flying. Co-developed with Gemfan, it includes innovative 2.2'' lower pitch Gemfan 2218 3-Blade Propellers (1.5mm shaft) and LAVA Series 1104 | 7200KV Brushless Motors, paired with the recommended LAVA 3S 550mAh 75C Battery. This setup provides high RPM, maximum thrust, and stable linear power, achieving a thrust-to-weight ratio greater than 5:1 for agile freestyle performance and up to 6 minutes and 40 seconds of flight time. The frame is sculpted with aerodynamic principles to enhance the freestyle shooting experience.

FLIGHT CONTROLLER

The F4 2-3S 20A AIO FC V1 features an ESC with a peak current of 25A, ensuring stable operation of the FC even in the event of motor stalling. The addition of a 9V 2A BEC power supply ensures the stable operation of the DJI O3 HD VTX when the battery voltage is low. It also includes a DJI O3 6-pin PMU, allowing for connection to HD VTX without soldering. It integrates features such as a 16MB black box, with support for GPS, external receivers, and other devices. The redesigned solder pad layout and USB connector make installation and maintenance easier and more convenient.

• Recommended Battery: LAVA 3S 450mAh 75C Battery, LAVA 3S 550mAh 75C Battery, 3S 650mAh Battery
• Supported Camera: DJI O3 Cam, Caddx Series, RunCam Series (19mm/20mm)
• Flight Time: 6 minutes and 40 seconds (LAVA Series 3S 550mAh Battery)
• Supported VTX: DJI O3 Air Unit, Caddx Vista Kit, RunCam Link
• Props: Gemfan 2218 3-Blade Propellers (1.5mm Shaft)
• Motor: LAVA Series 1104 | 7200KV Brushless Motors
• Weight (Without Battery, Air Unit): 66.3g
• Battery Slot: 20mm × Unlimited Height
• Camera Filter Installation: Vertical
• FC: F4 2-3S 20A AIO FC V1
• Battery Connector: XT30
• RX Version: ELRS, TBS
• Wheelbase: 93.7mm

IMPORTANT NOTES

• Caution: Ensure the battery's positive and negative terminals are connected correctly to avoid damaging the drone.

• 1x  Pavo Series COB LED Strip Accessory Kit (Ice Blue)
• 4x  Gemfan 2218 3-Blade Propellers (1.5mm Shaft)
• 1x Pavo20 Pro Brushless Whoop Quadcopter
• 1x  HD VTX Bracket Screw Package
• 1x  PCBA | Type-C Adapter Board
• 1x  Pavo20 Pro HD VTX Bracket
• 1x 4-Pin Adapter Cable
• 1x Hardware Kit