Scisky F3 brushed flight control board based on F3 EVO hardware, supports CleanFlight and BetaFlight firmware. There are 3 kinds of hardware for its built-in compatible receiver: A---CYRF6936, B---CC2500，C---A7105. There are 6 option protocols for the built-in compatible receiver: 1=>DSMX/2; 2 =>DEVO (on testing); 3 =>Futaba SFHSS; 4=> FrSky (on testing); 5=> FlySky AFHDS; 6=>Hubsan;

MX VTX 25MW module (video transmitter) can be plugged and installed on Scisky F3 brushed flight control board directly, no soldering is needed, and also you can plug and play MX VTX-25MW & OSD and the analog camera

Features

• STM32F303CCT6 main controller
• MPU6500 sensor (SPI way)
• 6 optional built-in receivers
• Onboard 5V/1000mA DCDC booster circuit
• 4 built-in brushed ESCs (each brushed ESC can support current up to 6A)
• No need soldering for installing VTX-25MW module or VTX-25MW & OSD module (note: analog VTX is 40CH)
• Every built-in receiver on the board outputs receiver signal in the same 8CH PPM format and order, the channel number depends on customer’s transmitter
• Customer can set up the working frequency of VTX according to his own request through transmitter
• Ports diagram (same on all of the Scisky F3 brushed FCs)

5.8G VTX channels list

Frequency checking and setting up on analog video transmitter