The DarwinFPV CineApe 25 frame is the first inverted 2.5-inch cinematic whoop frame of DarwinFPV. The frame comprises upper and lower layers of carbon plates and a high-strength injection molding ring with an advanced appearance. In addition, to enhance the frame's durability, we have added additional reinforcement to the injection-molded boot, which now excels in crash protection.

Note: (Insert any product options here in black text with options in bold.)

Example: "Choose from two KV's: 1800KV (4S) or 2500KV (6S)."

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: (Insert Video Title here in bold.)

• Injection-molded propeller guard
• Ducted aerodynamic design
• Quick-release frame design
• User-friendly design

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

PRE-TUNED AND PRE-SETUP

This RTF is fully built and test-flown by build technicians at our Florida facility.

• Bottom Plate Hole: 28mm x 15mm (3 holes) 20mm x 20mm, 25.5mm x 25.5mm
• Top Plate Hole: 20mm x 20mm, 25.5mm x 25.5mm
• Carbon Plate Camera Mounting Hole: 19mm
• Motor Mounting Hole: 9mm, 12mm
• 3D Print Camera Hole: 14mm
• Top Plate Thickness: 2.5mm
• Wheelbase: 112mm
• Weight: 66.7g

IMPORTANT NOTES

• The DJI Remote Controller is recommended for beginners but NOT required to use the FPV System, since you won't need to set up another receiver. If you don't have the DJI Remote Controller, you will need a receiver for your transmitter. and then bind to your own radio as usual.
• If you do not have the frsky transmitter, please downgrade the version lower than 2.X.X, www.frsky-rc.com for more details.
• Our current frsky receivers default version in 2.XX, requires us to use of the same version of frsky transmitter. 

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 3x M2 x 10 Hexagon socket head screw
• 4x M2 x 14 Hexagon socket head screw
• 6x M2 x 6 Hexagon socket head screw
• 5x M2 x 7 Hexagon socket head screw
• 2x Battery cable tie10 x 170mm
• 7x M2 x 12mm copper standoff
• 1x Injection molding guard
• 1x Battery anti-skid pad
• 1x Bottom plate 2mm
• 1x Top plate2.5mm
• 1x Antenna mount
• 1x Camera mount
• 4x M2 nylon nut
• 1x Sticker

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS