Introducing the MATEKSYS F405 Wing V2 Flight Controller, the ultimate choice for precision flight control in fixed-wing aircraft. With cutting-edge technology and an F405 processor, it ensures smooth, stable flights with lightning-fast processing speeds. Versatile compatibility allows seamless integration with peripherals for customization. Compact and robust, it's your go-to for optimal control and efficiency in aerial adventures. 

Note: (Insert any product notes here in Red BOLD Italic. Example: "First Shipment expected January 2022" or "Electronics are Not Included".)

VIDEO: Matek F405-Wing V2

• Ensures smooth and stable flights
• Lightning-fast processing speeds
• Efficiency in aerial adventures
• Cutting-edge F405 processor 
• Integration with peripherals
• Compact and robust design
• Precision flight control
• Versatile compatibility 
• Optimal control

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

USE BULLETED FEATURE HERE IN BOLD CAPS.

Add additional feature descriptions here to describe the above.

• MCU: STM32F405RGT6, 168MHz, 1MB Flash
• UARTs: 6, 1x Softserial_Tx option (INAV)
• ADC: 3 (VBAT, Current, RSSI)
• Built-in inverter: SBUS input
• Blackbox: MicroSD card slot
• USB: Type-C (USB2.0)
• IMU: ICM42688-P
• PWM outputs: 10
• OSD: AT7456E
• Baro: DPS310
• I2C: 2
• BEC 5V output:
  • Designed for: Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, GPS module, AirSpeed
  • Continuous current: 2 Amps
• PDB
  • Battery Voltage divider 1K:10K (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot)
  • Current Sensor: 220A, 3.3V ADC (INAV scale 150, ArduPilot 66.7A/V)
  • Input voltage range: 930V (36S LiPo) with TVS protection
  • Sense resistor: 100A continuous, 220A peak
• BEC 9V /12V output:
  • Stable 9V/12V output: Input voltage should be greater than output voltage +1V
  • Designed for: Video Transmitter, Camera, Gimbal, etc
  • 12V option usage: with Jumper pad
  • Continuous current: 2 Amps
• BEC Vx output
  
  • Stable Vx output: input voltage should be greater than Vx voltage +1V
  • Voltage adjustable: 5V Default, 6V or 7.2V options
  • Continuous current: 5 Amps, 6A Peak
• FC Firmware
  
  • ArduPilot: MatekF405-Wing (ArduPlane 4.4 or newer)
  • INAV: MATEKF405SE (INAV 6.0 or newer)
• Physical
  • Mounting: 30.5 x 30.5mm, 4mm with Grommets 3mm
  • Dimensions: 54 x 36 x 13 mm
  • Weight: 25g
• BEC 3.3V output
  
  • Designed for: external 3.3V peripherals
  • Continuous current: 200mA
  • Regulator: Linear 

IMPORTANT NOTES

• Insert important warnings or notes here. Example: "Do not overheat." or "Always use the included charger for best performance."

•  (Insert recommended products here. Example: "Battery: Lumenier 10000mAh 6s 25c Lipo Battery")

•   (Insert links such as manuals, firmware, etc)

• 1x 20cm JST-GH-4P to JST-GH-4P cable for I2C port
• 3x Dupont 2.54 pins (Board is shipped unsoldered)
• 1x MATEKSYS F405 Wing V2 Flight Controller

ADD VIDEO TITLE HERE IN BOLD CAPS

ADD VIDEO TITLE HERE IN BOLD CAPS